Whirlpool Load & Go - User Manual

Need help?

Do you have a question about the Whirlpool Load & Go and is the answer not in the manual?

Summary

Using the Load & Go Detergent Dispenser

Load & Go Dispenser Functionality

Explains the system for automatically dispensing HE liquid detergent for multiple loads.

Detergent Use and Restrictions

Details on HE liquid detergent only, avoiding packets/powder, and preventing over-sudsing.

Changing Detergent Concentration

Instructions on how to adjust the detergent concentration level from 2x to 8x.

Using Single Dose Detergent

Steps to disable the Load & Go™™ system and use a single dose of HE detergent.

Summary

Using the Load & Go Detergent Dispenser

Load & Go Dispenser Functionality

Explains the system for automatically dispensing HE liquid detergent for multiple loads.

Detergent Use and Restrictions

Details on HE liquid detergent only, avoiding packets/powder, and preventing over-sudsing.

Changing Detergent Concentration

Instructions on how to adjust the detergent concentration level from 2x to 8x.

Using Single Dose Detergent

Steps to disable the Load & Go™™ system and use a single dose of HE detergent.

This document describes the Whirlpool Load & Go™ Detergent Dispenser system, specifically for Whirlpool Top Load Washers.

Function Description:

The Load & Go™ system is an integrated detergent dispensing solution designed to simplify the laundry process by allowing users to load a large quantity of High Efficiency (HE) liquid detergent into their washer. This system then automatically dispenses the correct amount of detergent for each wash cycle, eliminating the need to add detergent before every load. It is engineered to provide convenience and ensure optimal cleaning performance by using the precise amount of detergent required. The system is specifically designed for HE liquid detergents and does not support powdered detergents or single-dose laundry packets within the dispenser itself.

Important Technical Specifications:

Detergent Type: Exclusively for High Efficiency (HE) liquid detergents. Non-HE detergents are not compatible and can lead to issues such as excessive sudsing, longer cycle times, reduced rinsing performance, and potential component failures.
Capacity: The Load & Go™ dispenser is designed to hold enough liquid detergent for multiple loads, typically lasting for approximately 14 loads before needing a refill.
Concentration Levels: The system supports detergent concentration levels ranging from 2x to 8x. The default setting is 2x, which is the standard level for most detergents. Users can adjust this setting based on their detergent's concentration.
Visibility: The dispenser features a clear drawer or window that allows users to visibly monitor the liquid detergent level, indicating when a refill is needed.

Usage Features:

Automatic Dispensing: Once filled, the system automatically dispenses the correct amount of HE liquid detergent for each wash cycle, removing the need for manual measurement before every load.
Refill Indicator: Users can monitor the detergent level through a clear window. Refilling is only necessary when the level is visibly low, not after every wash.
Detergent Concentration Adjustment: The detergent concentration level can be adjusted by pressing and holding the Load & Go™ button. This allows users to match the dispenser's setting to the concentration of their specific HE liquid detergent (e.g., 2x, 4x, 8x). This feature ensures accurate dispensing regardless of the detergent's potency.
Single-Dose Detergent Dispenser Option: The system can be disabled to allow for the use of a single-dose detergent dispenser. To do this, the Load & Go™ button is pressed until its light turns off. When disabled, users can pour a measured amount of liquid HE detergent into the single-dose dispenser, which will then dispense at the optimal time during the wash cycle.
Compatibility with Other Detergent Types (External): While the Load & Go™ dispenser is only for HE liquid detergent, single-dose laundry packets or powdered detergent can still be used by placing them directly into the washer basket before starting the load.
Priming the Dispenser: If the Load & Go™ dispenser runs out of detergent and is refilled, the first load after refilling may not receive detergent. To prime the system and ensure detergent dispenses correctly for subsequent loads, a Quick Wash cycle with no clothing should be run.

Maintenance Features:

Refill Guidance: The primary maintenance involves refilling the dispenser with HE liquid detergent when the visible level is low. This is a straightforward process, as indicated by the clear drawer.
Prevention of Oversudsing: The system is designed to work with HE detergents, which produce the right amount of suds. Using non-HE detergents or simultaneously using the Load & Go™ dispenser and a single-dose detergent dispenser (without disabling Load & Go™) will result in oversudsing, which can negatively impact washing performance and potentially damage the appliance. Adhering to the specified detergent type and usage instructions helps maintain optimal performance and prevent issues.
Troubleshooting for Empty Dispenser: If the dispenser runs out of detergent, the system will not dispense detergent. Refilling and then running a Quick Wash cycle without clothing is recommended to prime the dispenser and ensure proper function for subsequent loads.
Owner's Manual Reference: The document frequently refers users to their Owner's Manual for specific model information and more detailed guidance on choosing the correct concentration level and general appliance operation, indicating that the manual is a key resource for comprehensive maintenance and usage information.
Product Literature Access: Users can download or view product literature for their appliance via a provided link, offering an additional resource for detailed information and support.

Whirlpool Load & Go Specifications

General

Brand	Whirlpool
Model	Load & Go
Category	Dispenser
Language	English