Whirlpool LSA1300 - Installation Procedure; MOVE MACHINE TO THE FINAL LOCATION; TILT THE MACHINE; REMOVE THE SHIPPING BRACKET

Whirlpool | User Manual
7
Installation Procedure



       


Excessive Weight Hazard



1. MOVE MACHINE TO THE FINAL LOCATION
1.5 m (59”)
        
   

Note:
To avoid oor damage, set washer onto cushion before
moving it and make sure lid is taped shut.
2. TILT THE MACHINE
      
 

  
      

3. REMOVE THE SHIPPING BRACKET
     


IMPORTANT       

4. SET THE MACHINE UPRIGHT
      

5. ATTACH DRAIN HOSE TO DRAIN PORT
     
     
      
      

Steps to follow
Insert the drain hose to the drain outlet

 
 

 