Whirlpool Refrigarator - Operations Alarms

13
Operations Alarms
Intheeventofoperationalarms,theywillalsobedisplayedinthedigitsLEDs,(e.g.Failure1,Failure2,
etc...)callAfter-salesServiceandspecifythealarmcode.Theacousticalarmsounds,theAlarmicon
lightsupandtheFletteronthedigitdisplayblinksaccordingtofailurecodedescribedbelow:
Failure code Visualization
Error2

Fletterblinkon/offat0,5sec.BlinksON2times
thenremainofffor5seconds.Patternrepeats.
x2
Error3

Fletterblinkon/offat0,5sec.BlinksON3times
thenremainofffor5seconds.Patternrepeats.
x3
Error6

Fletterblinkon/offat0,5sec.BlinksON6times
thenremainofffor5seconds.Patternrepeats.
x6
If the appliance
temperature is too high:
• Aretheappliancecontrolscorrectlyset?
• Hasalargeamountoffoodbeenaddedtotheappliance?
• Checkthatthedoorisnotopenedtoooften.
• Checkthatthedoorcloseproperly.
• Makesurethatairflowventsinsidethecompartmentarenot
blocked,asthispreventsthecirculationofcoldair.
If there is moisture
build-up:
• Makesurethatairflowventsinsidethecompartmentarenot
blocked,asthispreventsthecirculationofair.
• Makesurethatthefoodisproperlypackaged.Dryanydampness
onfoodcontainersbeforeplacingthemintheappliance.
• Checkthatthedoorsarenotopenedtoooften.Whenthedooris
opened,humidityfromtheroomairenterstheappliance.Themore
oftenthedoorisopened,thefasterhumiditybuildsup,especially
whentheroomitselfisveryhumid.
• Iftheroomisveryhumid,itisnormalformoisturetobuildupinside
therefrigerator.
If the doors do not open
and close properly:
• Checkthatfoodpackagesarenotblockingthedoor.
• Checkthattheinternalpartsorautomaticicemakerarenotoutof
position.
• Checkthatthedoorsealsarenotdirtyorsticky.
• Ensuretheapplianceislevel.