Whirlpool S26S5 DF - Service Bulletin 4812 711 40228

SERVICE
Whirlpool EMEA
Customer Services
8586 181 53011, 01/25/11
page 20 of 47
Service Bulletin 4812 711 40228
AUTHOR: Jochen Hohl
Last Update: 09/13/10
VERSION: 1.0
TITLE: Assembly User Interfaces of Side by Side are not longer available
(All Side by Side from production 2002 till week03/2007.Related to 7-Segment and rounded door versions.)
REMEDIAL ACTION
Issue:
For the “old range” of Side by Side products (Cassinetta production), the User Interface was available
in SPC only in combination with the frame (Pos. Nr. in the Service Manual: 3200).
To guarantee a better spare parts availability, followed single components will be in future available:
- UI-single Board
- Inlay
- Plastic frame
- Rear cover of the UI
The tables below shows you the factory / service code of all single components in comparison to
the models and commercial codes.
Note: The assembly User Interface service code (position number 3200 in the Service Manual),
will be service recoded to the plastic frame (single component).
© Whirlpool EMEA www.scc-service.com