EasyManua.ls Logo

Whirlpool SF385PEE - Page 15

Whirlpool SF385PEE
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
5. Press the start/enter pad.
A preheating time will count down on the display.
The oven control automatically sets preheating
times based on the oven temperature you select:
For 245°F and less, the preheating time is
4 minutes.
For 250°F-445°F, the preheating time is
10 minutes.
For above 450°F, the preheating time is
15 minutes.
As the preheat countdown ends, the selected oven
temperature replaces “PrE” on the display and the
time of day reappears. You will hear a 1-second
tone, indicating the oven is ready to use.
The AccuBake system electronically regulates
the preheat time and temperature to maintain a
precise temperature range for the best cooking
results. The preheat and set temperatures may
be different at the end of the countdown. This
is normal.
NOTES:
When the oven temperature is greater than
170°F, no preheating time will be shown on the
display.
You can change the temperature setting any
time after pressing the start/enter pad. You do
not have to press the start/enter pad again.
The preheating time will not change if you
reset the temperature before the countdown
time ends.
If you are baking/roasting while the minute
timer is counting down, you can see the set
baking/roasting temperature for 5 seconds
by pressing the bake pad.
USING YOUR RANGE
YOU SEE
HEAT BAKE
O
N
START
ENTER
5 SEC
(example for set temperature
of 350°F)
PRESS YOU SEE
HEAT BAKE
O
N
BAKING/ROASTING (CONT.)
continued on next page

Related product manuals