EasyManua.ls Logo

Whirlpool SF385PEG - USING THE SELF-CLEANING CYCLE; SETTING THE CONTROLS

Whirlpool SF385PEG
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SETTINGTHECONTROLS
NOTE: Make sure the clock is set to the correct
time of day. (See "Setting the clock" in the "Using
Your Range" section.)
1. Press AUTO CLEAN.
This will automatically set a 3V2-hour
Self-Cleaning cycle.
NOTE: There will be a 30-minute cool-down
½ hour before the cycle is over.
PRESS
YOU SEE
2. Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or
shorter than hours, use the hour and minute
pads to set the cleaning time you want. Press
the "up" (&) or "down" (V) pad(s) until a time
between 2½-4½ hours shows on the dispray.
Use hours for light soil.
Use 31/_-4½hours for average to heavy soil.
PRESS
A A
[,°I1-1
/VllVJ
YOU SEE
3. Start the oven.
The door will lock as soon as you press
START/ENTER.
PRESS
(example shows 4½-hour
cleaning time)
YOU SEE
4. After Self-Cleaning cycle ends and the oven
reaches normal baking/roasting temperatures:
LOCK'D goes off and the door unlocks.
YOU SEE
5. After the oven cools to room temperature, wipe
off any residue or ash
with a damp cloth or
sponge. If needed,
touch up spots with a
mildly abrasive cleanser
or cleaning sponge.
continued on next page
21

Other manuals for Whirlpool SF385PEG

Related product manuals