EasyManua.ls Logo

Whirlpool SF385PEG - USING THE SURFACE BURNERS

Whirlpool SF385PEG
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USINGYOURkNGE
USINGTHESURFACEBURNERS
Fire Hazard
Do not let the burner flame extend beyond
the edge of the pan,
Turn off all controls when not cooking.
Failure to follow these instructions can
result in death or fire,
Usin thecontrolknobs
Your range comes with electric ignitors. Electric
ignitors automatically light the burners each time
you turn the control knobs to LIGHT.
Place a fitled pan on the burner grate before
turning on the surface burner. Do not operate a
burner for extended periods of time without
having cookware on the grate.
Push in the control knob and turn it counter-
clocloNise to the
LIGHT position. The
clicking sound is the
ignitor sparking. Make
sure the burner has lit.
To stop the clicking
j sound after the burner
lights, turn the control
knob to the cook
setting you want. You
can set the control
knob anywhere between HIGH and LOW.
NOTE: All four electric ignitors will click at the same
time. However, the burner with the control knob
turned to LIGHT is the one that will ignite.
Burnerheatsettings
Use the following chart as a guide.
SETTING RECOMMENDED USE
LIGHT To light the burner,
POWER_Burner To provide highest heat
(left front burner) setting.
HIGH To start food cooking.
To bring liquid to a boil.
Mid-range To hold a boil.
(between HIGH To fry chicken or pancakes.
and LOW) Forgravy, pudding, and icing.
To cook large amounts of
vegetables.
LOW To keep food warm.
To simmer.
ACCUSlMMERTM To provide lowest
setting simmer/heat setting.
(right rear burner) To melt chocolate or butter.
NOTE: Do not leave empty cookware, or cookware
which has boiled dry, on a hot surface burner. The
cookware could overheat, causing damage to the
cookware or cooking product.
Usim]POWERBurner
POWER Burner is an adjustable setting for the left
front burner which provides an ultra-high heat setting.
It can be used to rapidly bring liquid to a boil and to
cook large quantities of food.
Usin ACCUSIMMER
ACCUSIMMER is an adjustable setting for the right
rear burner. It allows more accurate simmer control at
the lowest setting.
Easywaystosaveeners./
To help shorten your cooking time, use the least
amount of liquid possible.
Preheat your pots and pans only when
recommended and for the shortest time possible.
Start your food on a higher heat setting, then turn
the control to a lower setting to finish cooking.
6

Other manuals for Whirlpool SF385PEG

Related product manuals