To Next PageTo Next Page
Need help?Do you have a question about the Whirlpool W10096986A and is the answer not in the manual?
Explains the safety alert symbol and the meaning of DANGER and WARNING.
Warns about risks associated with dryer installation and venting materials.
Lists essential safety rules for operating the dryer to prevent hazards.
Provides steps to follow if a gas leak is detected and warnings about gas leaks.
States chemical warnings required by California law regarding cancer and reproductive harm.
Explains how to select cycles using the main control knob, including Timed Dry and AccuDry™.
Describes how to select drying temperature based on fabric type for optimal drying.
Explains the feature that tumbles clothes periodically to prevent wrinkles.
Details the function of the end-of-cycle signal and the push-to-start button.
Details how to use automatic cycles for fabric care and energy savings based on dryness levels.
Explains how to use timed drying cycles for various loads and the available temperature settings.
Provides guidance on selecting appropriate drying temperatures for different fabric types.
Instructions on how to clean the lint screen before each load to ensure proper drying.
Guidance on properly loading the dryer drum, ensuring clothes can tumble freely.
Guide on choosing the appropriate drying cycle based on load type and desired dryness level.
How to adjust temperature/fabric and wrinkle shield settings for the selected cycle.
Instructions on choosing the audible signal for cycle completion and its function.
How to initiate the drying cycle by pressing the start button.
Ensuring the area around the dryer is clear for proper airflow and operation.
Detailed instructions for cleaning the lint screen, including routine and as-needed methods.
Steps for cleaning the dryer drum and addressing potential stains from dyes.
Guidance on removing lint from the dryer cabinet and exhaust vent periodically.
Instructions for safely preparing the dryer for periods of non-use or storage.
Steps to take when moving the dryer, including power disconnection and securing parts.
Procedure for replacing the light bulb inside the dryer drum.
Addresses issues like long drying times, lint screens, and improper venting.
Solutions for the dryer not starting, including power supply and door closure checks.
Identifies causes for unusual noises and checks for proper installation and operation.
Troubleshooting steps for when the dryer is not producing heat.
Addresses automatic cycles ending early and sensor contact issues.
Solutions for lint transfer to clothes, including softener sheet usage and screen cleaning.
Explains causes of drum stains, such as dye transfer from clothing.
Tips to prevent wrinkles, including using Wrinkle Shield™ and drying smaller loads.
Addresses odors from new heating elements or environmental factors.
Guidance to reduce overheating by selecting lower temperatures or auto cycles.
Details the one-year warranty coverage for defects in materials and workmanship.
Lists conditions and damages not covered by the limited warranty.
Explains limitations on implied warranties like merchantability and fitness for a particular purpose.
Addresses exclusion of incidental or consequential damages and warranty rights.
Guidance on checking troubleshooting sections and visiting the website before calling for service.
Information on ordering FSP® parts and accessories, and contact details.
Details on what assistance consultants provide and how to contact them.
General