Whirlpool W10804668A User Manual

ECOBOOST™ OPTION
Turn on for optimal energy savings.
Turn off for optimal cycle times.
EcoBoost
™
option is only available
for NORMAL.
NOTE: Energy savings may vary
across loads.
ADJUST CYCLE
SETTINGS, IF DESIRED*
5
PRESS POWER TO TURN
ON THE DRYER
3
SELECT THE DESIRED
CYCLE FOR YOUR LOAD*
4
Quick Start Guide
Using Your High Eciency Dryer
CLEAN THE LINT SCREEN
1
SELECT ANY
ADDITIONAL OPTIONS*
6
TOUCH AND HOLD START/
PAUSE TO BEGIN CYCLE
7
* NOTE: See “Cycle Guide” in the Use and Care Guide for more information about cycles, settings, and options. Not all cycles, settings, and options are available with all models.
Read your Use and Care Guide before using your dryer.
LOAD THE DRYER
2
W10804668A
W10804669A - SP
®/™ ©2015 Whirlpool. All rights reserved. Used under license in Canada. 06/15
Printed in U.S.A.
Activate the EcoBoost
™
option to increase your energy
savings. This option uses a slightly
lower heat level and extends cycle time.
Appearance may vary
depending on model.

Whirlpool W10804668A Specifications

General

Category	Dryer
Model Number	W10804668A
Brand	Whirlpool
Type	Electric
Color	White
Dryer Venting	Vented
Dryer Capacity	7.0 cu. ft.
Number of Dryer Cycles	12
Dryer Control Type	Electronic
Energy Star Certified	No
Voltage	240 V
Amperage	30 A
Width	29 inches

Summary

Quick Start Guide for High Efficiency Dryer

Clean the Lint Screen

Ensure the lint screen is clean before drying to maintain performance and efficiency.

Load the Dryer

Properly load the dryer with clothes, avoiding overfilling for optimal drying results.

Turn On the Dryer

Press the power button to activate the dryer's control panel and display.

Select the Desired Cycle

Choose the appropriate drying cycle based on the load type and desired outcome.

Adjust Cycle Settings

Modify settings like temperature and dryness level for optimal fabric care and results.

Select Additional Options

Add features like EcoBoost for energy savings or Steam for wrinkle reduction.

Start the Drying Cycle

Touch and hold the start/pause button to begin the selected drying cycle.