To Next PageTo Next Page
Need help?Do you have a question about the Whirlpool WED5100HW and is the answer not in the manual?
General| Brand | Whirlpool |
|---|---|
| Model | WED5100HW |
| Type | Electric Dryer |
| Capacity | 7.0 cu. ft. |
| Fuel Type | Electric |
| Dryer Venting | 4-Way Venting |
| Number of Dry Cycles | 12 |
| Number of Temperature Settings | 3 |
| Width | 27 inches |
| Color | White |
| Reversible Door | Yes |
| Energy Star Certified | No |
Specific warnings related to fire risks during dryer installation and operation.
Essential safety guidelines and precautions for using the appliance.
Lists all necessary tools and parts for the installation process.
Recommended clearances for installing the dryer in various locations.
Specific additional requirements for installing the dryer in mobile homes.
Instructions for connecting the dryer's electrical supply in the USA.
Guidelines for properly grounding the dryer for electrical safety.
Safety instructions for grounding electric dryers in Canada.
Safety instructions for grounding gas dryers in USA and Canada.
Information on natural gas and propane gas compatibility and conversion.
Guidelines for connecting the gas supply line to the dryer.
Details on burner input requirements, especially at higher elevations.
Steps to prepare the dryer for adjusting leveling legs.
Instructions on how to screw in and adjust the dryer's leveling legs.
Detailed steps for connecting the power supply cord to the dryer.
Specific instructions for a 4-wire power supply cord connection.
Specific instructions for a 3-wire power supply cord connection.
Instructions for connecting the dryer using a direct wire method.
Specific instructions for a 3-wire direct wire connection.
Alternative grounding method for 3-wire connections, requiring electrician verification.
Steps for connecting the gas supply line to the dryer.
Planning the pipe fitting configuration for gas connections.
Instructions on opening and checking the gas shut-off valve.
Requirements and recommended styles for dryer exhaust hoods.
Recommendations for using rigid metal vent for best performance.
Guidelines and limitations for using flexible metal vent.
Typical and alternative dryer exhaust installation configurations.
Specific exhaust venting requirements for mobile homes.
Guidance on selecting the best route for the dryer vent path.
Using charts to determine optimal vent length and elbow count.
Steps for installing the exhaust hood on the exterior wall.
Connecting the dryer vent to the installed exhaust hood.
Instructions for preparing the cold water faucet connection.
Connecting the long hose to the dryer's fill valve.
Connecting the dryer vent to the dryer's exhaust outlet.
Final positioning of the dryer after connecting the vent.
Checking the levelness of the dryer from all sides.
How to adjust the dryer's leveling legs to achieve a level position.
Instructions for installing or removing the base trim.
Step-by-step instructions for removing the dryer door.
Step-by-step instructions for replacing the dryer door.
Lists the tools required for reversing the dryer door swing.
Instructions for safely removing the dryer door from the cabinet.
Steps to reverse the door strike mechanism for a new swing direction.
Instructions for reassembling the door and trim pieces.
How to keep the dryer area clear for proper operation and airflow.
Instructions for cleaning the lint screen before or after each load.
Methods for cleaning the interior drum of the dryer.
Procedures for removing lint from the dryer cabinet and exhaust vent.
Precautions for when the dryer is not in use for an extended period.
Steps to take when moving the dryer, including cord-connected and direct-wired models.
Information on replacing and inspecting the water inlet hose for steam models.
Steps to prepare steam models for storage in freezing conditions.
