EasyManua.ls Logo

Whirlpool WGFM29 - User Manual

Whirlpool WGFM29
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
93% AND 95% 2-STAGE VARIABLE-SPEED GAS FURNACE
INSTALLATION INSTRUCTIONS
These furnaces comply with requirements embodied in the
American National Standard/National Standard of Canada ANSI
Z21.47-CSA-2.3 Gas Fired Central Furnaces.
WPIO-368B
Tradewinds Distributing Company, LLC
14610 Breakers Drive
Jacksonville, Florida 32258
Whirlpool Gold
®
Models
WGFD295,WGFM295
ATTENTION INSTALLATION PERSONNEL
As a professional installer, you have an obligation to know the product better than the customer. This includes all
safety precautions and related items. Prior to actual installation, thoroughly familiarize yourself with this instruction
manual. Pay special attention to all safety warnings. Often during installation or repair, it is possible to place
yourself in a position which is more hazardous than when the unit is in operations.
Remember, it is your responsibility to install the product safely and to know it well enough to be able to instruct a
customer in its safe use. Safety is a matter of common sense...a matter of thinking before acting. Most dealers have
a list of specific good safety practices...follow them.
The precautions listed in this installation manual are intended as supplemental to existing practices. However, if
there is a direct conflict between existing practices and the content of this manual, the precautions listed here take
precedence.
Placeholder
for Bar
Code

Table of Contents

Questions and Answers

  • J
    Jaclyn NelsonAug 11, 2025
    How to reset a Whirlpool WGFM29 after a lockout?
    • D
      dchanAug 11, 2025
      To reset your Whirlpool Furnace after a lockout, the integrated control module is designed to automatically reset itself and attempt to resume normal operations following a 1-hour lockout period. You can also try interrupting the 115-volt power to the furnace or manually cycling the thermostat by lowering it so that it doesn't call for heat for 1 to 20 seconds, then resetting it to its previous setting.
  • S
    Susan MartinAug 23, 2025
    What to do if my Whirlpool Furnace is in lockout mode?
    • M
      Matthew StuartAug 25, 2025
      If your Whirlpool Furnace is in lockout mode, the integrated control module will automatically reset itself, attempting to resume normal operations after a 1-hour lockout. Alternatively, you can interrupt the 115-volt power to the furnace or manually cycle the thermostat by lowering it so there is no call for heat for 1 to 20 seconds, and then reset it to the previous setting.

Whirlpool WGFM29 Specifications

General IconGeneral
Model NumberWGFM29
Fuel TypeNatural Gas
Product TypeUpflow/Horizontal Furnace
Dimensions (H x W x D)17.5" x 21.5"
Weight120 lbs

Related product manuals