Need help?Do you have a question about the Whirlpool WGT4027HW0 and is the answer not in the manual?
Procedure to check incoming and outgoing power to the main control board for functionality.
Checks the electrical connections and solenoid resistance of the hot and cold water inlet valves.
Overview of tests for the washer's drive system, including initial checks and common fault codes.
Tests connections, motor, and switch for the shifter assembly, verifying its position and operation.
Checks the motor, its windings, wiring, and start capacitor for proper operation and resistance.
Tests functionality of console LEDs, rotary switches, and cycle selector knob during UI Test Mode.
Verifies the functionality of the pressure transducer and water level sensing components.
Checks the drain pump's resistance, connections, and operation to diagnose draining issues.
Tests the lid lock mechanism's resistance and operation, verifying proper locking and unlocking functions.
Checks continuity of power cord connections to the dryer's internal components and timer.
Tests the dryer's drive motor, its windings, belt switch, and associated wiring for continuity.
Diagnoses heating circuit issues by testing the heater element, thermostats, and thermal cut-offs.
Checks continuity of the thermal fuse, a safety device wired in series with the dryer motor.
Tests the thermal cut-off component for continuity, crucial for preventing overheating.
Measures the resistance of gas valve coils to determine if they have malfunctioned.
General| Brand | Whirlpool |
|---|---|
| Model | WGT4027HW0 |
| Category | Laundry Appliance |
| Language | English |
To Next Page
