To Next PageTo Next Page
Need help?Do you have a question about the Whispbar S41W and is the answer not in the manual?
Unpack and verify all components are present and undamaged.
Ensure the roof rack faces the front of the vehicle for proper installation.
Use keys to unlock and remove covers from the rack legs.
Find the hex key, extend the leg, and remove the key.
Use the hex key to reverse the leg screw by 10 turns.
Place crossbar ends on roof rails, swing to secure clamps, and ensure proper alignment.
Pull legs evenly, ensure equal adjustment, and tighten screws to specified torque.
Crossbars should be parallel and perpendicular to roof rails for correct fitment.
Slide Hex keys back, ensure leg locks are horizontal, and slide covers into place.
Check that the crossbar is securely attached to the vehicle after all adjustments.
Clean roof and product surfaces. Follow fitting instructions, avoid automatic car washes.
Set crossbar distance, check security, note roof compatibility, and adhere to load limits.
Secure loads evenly with non-elastic straps. Be aware of vehicle dynamics and check loads regularly.
Remove product when not in use. Lubricate parts, store safely, and replace worn components.
Lists available carriers: roof box, ski/snowboard, kayak, bicycle, and others in the catalogue.
Covers product defects for original purchaser. Provides contact for assistance and replacement parts.
Details limitations of liability, exclusions, and important legal notices regarding the warranty.
General| Brand | Whispbar |
|---|---|
| Model | S41W |
| Category | Automobile Accessories |
| Language | English |
