Page 4 | 1-800-343-9463
CWSK.PS4000.B
082015
STEP 2: BEFORE YOU START
Disconnect both the evaporator unit (Air Handler) and the
Condensing Unit from each power source.
Shut O Power going to the Evaporator and Condensing Unit.
WARNING: Failure to do so may cause electrical shock which
can result in injury or death.
A 2 wire 18-20 awg thermostat wire will need to be ran from the evaporator unit
to the condensing unit prior to installing the Cold Weather Start Kit.
Review the Tools Needed and Components Provided document prior to starting.
To Next Page
Loading...
