TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . .2
What Is the WhisperKOOL
®
System?..................2
How Does the WhisperKOOL System Work? .............2
Receiving and Unpacking .....................3
Preparing the Wine Cellar ....................4
Mounting the Unit ..............................5
Ventilation ...................................6
Installation..................................7
Electrical Needs ...............................7
Sizing Unit to Room.............................7
Placement of Unit ...............................9
Installing Thermostat .............................9
Using the WhisperKOOL System ..............10
Condensate Evaporator Switch ....................10
Drain Line
..................................10
Liquid Measuring Thermostat System .........11
PDT JR. Operating Instructions ............12
PDT Operating Instructions ................13
Normal Operation .........................14
Maintenance ...............................14
Humidity Control
............................14
Troubleshooting Guide ....................15
Solutions to Common Problems ..................15
Technical Assistance ......................20
How to Contact Customer Service.................20
Warranty Clarification on WhisperKOOL Product....21
Limits and Exclusions.........................21
Vinothèque Customer Service
....................21
Warranty Service
............................22
Limited Warranty . . . . . . . . . . . . .23
Table of
Contents
-1-
NEW OWNERS PLEASE NOTE…
ALWAYS PLACE UNIT IN UPRIGHT POSITION
Do not start or plug-in your new unit for 24 hours after delivery. . .
Units are sometimes accidentally tipped onto their sides
during shipping which may allow compressor oil to escape
their reservoirs. . .
Premature starting—before the oil has had a chance to
resettle—can cause damage to the compressor and result in
a lack of cooling.
A DEDICATED 20 AMP CIRCUIT IS HIGHLY
RECOMMENDED FOR OPTIMUM OPERATION!
To Next Page
Loading...
Need help?
General
