What to do if 'AdCoUt' appears on my white bird W31S display?
If you see 'AdCoUt' on the display of your White Bird Scales, it means the load cell signal is out of the ADC range. To solve this, check the load cell connection, inspect the load cell itself, verify the calibration, and if necessary, replace the PCB.
What does 'Err 34' mean on my White Bird Scales and how can I fix it?
If 'Err 34' is displayed on your White Bird Scales, it indicates that the load cell signal isn't increasing after you load the scale. To fix it: * Check the load cell connection. * Check the load cell cable where it connects to the instrument. * If neither of these steps work, the PCB may need to be replaced.
What does error 'Err 35' mean on White Bird Scales?
If you see 'Err 35' on your White Bird Scales display, it means the load increase is too small. Here's what you can do: 1. Check the scale mechanics. 2. Check the load cell connection. 3. Increase the test weight. 4. If none of these work, consider changing the PCB.
What to do if my white bird W31S Scales displays 'Over'?
If 'Over' appears on the display of your White Bird Scales, the load cell signal is higher than the calibrated maximum level. You should call service for checking load cell and recalibration.
What does 'Under' mean on my white bird W31S display?
If 'Under' is displayed on your White Bird Scales, it means the load cell signal is lower than the calibrated zero level. You should call service for checking load cell and recalibration.
What does 'Err 70' mean on white bird W31S Scales and how do I fix it?
Error 'Err 70' on your White Bird Scales indicates that the maximum scale capacity is more than 60 kg or 150 lbs. To resolve this, reduce the capacity of the scale.
What does error 'Err 2' mean on white bird W31S?
If 'Err 2' appears on the display of your White Bird Scales, it indicates an ADC communication error. The suggested solution is to change the PCB.
Why does my white bird W31S display 'E E E'?
If 'E E E' is displayed on your White Bird Scales, check that the scale is unloaded when you power it on.
Read safety warnings before installing and using the scale.
Guides on placing the scale on a stable surface and adjusting its feet.
Instructions for connecting external devices like power adapters and foot switches.
Steps to set the scale to zero for accurate measurements.
How to use the tare function to exclude container weight.
How to sample pieces to determine average piece weight for counting.
Guide for entering check weighing data into PLU/ALU memory.
Lists common error codes and their corresponding troubleshooting steps.
General| Brand | white bird |
|---|---|
| Model | W31S |
| Category | Scales |
| Language | English |
To Next Page
