Need help?Do you have a question about the White Industries Diagnostic 1090AT and is the answer not in the manual?
General| Brand | White Industries |
|---|---|
| Model | Diagnostic 1090AT |
| Category | Other |
| Language | English |
Essential safety precautions for operating the unit.
Guidance on understanding and following safety messages.
Explanation of hazard signal words and their meanings.
Definitions of key terms used in the manual.
Information on different types of refrigerants.
Guidelines for safe handling of refrigerants.
Warnings and precautions related to refrigerant use.
Warning about using R-12 refrigerant substitutes.
Details on lubricants used with refrigerants.
Safety precautions for handling refrigerant oil.
Overview of the unit's components and features.
Identification of components on the front panel of the unit.
Identification of components on the back panel of the unit.
General specifications including power and dimensions.
Operational parameters like temperature and pressure ranges.
Recommended storage conditions for the unit.
Steps for preparing and installing the recovery tank.
Procedure for turning on and initializing the unit.
Configuration options for unit settings like contrast, time, and units.
Procedure to evacuate the recovery tank before first use.
Overview of the standard steps for A/C service.
Process for recovering and recycling vehicle refrigerant.
Removing air and moisture from the vehicle A/C system.
Performing a leak test after evacuation.
Procedure for recharging the vehicle A/C system.
How the unit performs modes automatically or semi-automatically.
Capturing vehicle data before and after service.
Explains messages related to recovery tank status.
Steps to safely remove the recovery tank from the unit.
Recovering refrigerant from service hoses.
Procedure to add refrigerant to the recovery tank.
Troubleshooting common error messages.
Information on the master filter/dryer.
Steps to replace the master filter/dryer.
Resetting the filter replacement reminder.
Procedure for checking, cleaning, or replacing particle filters.
Inspecting and replacing O-rings in service hose couplers.
Routine checks and maintenance for the vacuum pump.
Procedure for changing the vacuum pump oil.
Replacing the refrigerant identifier filter.
Steps for replacing the printer paper roll.
Instructions for storing the unit for extended periods.
List of available part numbers and descriptions.
To Next Page