White Knight B96G8W - User Manual

INSTRUCTIONS FOR USE
8kg CONDENSER TUMBLE DRYER
B96G8W
IMPORTANT: PLEASE READ THESE
INSTRUCTIONS THOROUGHLY BEFORE USING
THIS APPLIANCE. KEEP THEM IN A SAFE PLACE
FOR FUTURE REFERENCE.
IMPORTANT USER INFORMATION
– This appliance is intended for NORMAL DOMESTIC
USE ONLY.
– Please note it is not recommended that the dryer is
placed directly next to ovens, cookers or other heating
appliances as the performance of the dryer may be
affected.
– Any electrical work required to install the appliance
should be carried out by a qualified person.
– The tumble dryer is not to be used if industrial chemicals
have been used for cleaning.
– It is important to clean the lint filter after each drying
cycle and the heat exchanger every month or the
restrictions to airflow will extend drying times and could
cause the safety cut-out to trip.
– DO NOT allow lint to accumulate around the tumble
dryer - risk of fire

Summary

Important User Information and Safety

Maintenance and Safety Precautions

Clean filters and heat exchanger, prevent lint accumulation to avoid fire risk.

Drying Safety and Material Guidelines

Ventilation and Prohibited Items

Unsuitable Materials and Cycle Warnings

Installation, Operation, and Safety

Installation Site and User Restrictions

Dryer Handling and Servicing

Position for airflow, handle carefully, use authorized service only, unplug when not in use.

Operational Safety and Item Handling

Electrical Safety and Connections

Use correct cable/plug, connect to own socket; no adaptors or extension leads.

Drying Restrictions and Load Advice

Do not block inlets, exceed load, dry wet/damaged items, or unsuitable wool items.

Load Management and Appliance Safety

Load Size and Drying Efficiency

Earthing Requirement and Disposal

Ensure appliance is earthed; dispose of according to WEEE regulations.

Dryer Installation and Preparation

Filter and Load Preparation

Fire Hazard Warning

Never switch off the dryer with a hot load inside due to fire risk.

Filter Cleaning and Water Bottle Management

Filter Cleaning Procedure

Always clean filters after each use to maintain airflow and prevent safety cut-outs.

Emptying the Water Bottle

Heat Exchanger Maintenance

Heat Exchanger Cleaning Instructions

Clean the heat exchanger monthly to maintain efficiency; handle plates carefully to avoid damage.

Removing and Re-installing Heat Exchanger

Detailed steps for safe removal, cleaning, and re-installation of the heat exchanger.

Advanced Features and Programme Table

Delay Start and Child Lock

Programme Selection Guide

Operation and Problem Solving

Troubleshooting Common Faults

Solutions for Bottle Full, Filter, Door, Heat Exchanger, and program errors.

White Knight B96G8W Specifications

General

Dryer Type	Vented
Vent Hose Included	Yes
Colour	White
Color	White
Programs	Cotton, Synthetic, Delicate