EasyManua.ls Logo

White Outdoor GT-2150 User Manual

White Outdoor GT-2150
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATOR’S MANUAL
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
PRINTED IN U.S.A. FORM NO. 770-10315
Warning:
This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-
covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting
applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.
In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have
similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized
service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-9722.
(11/99)
Hydrostatic Garden Tractor
Models GT-2150
WHITE OUTDOOR PRODUCTS COMPANY P.O. BOX 361131 CLEVELAND, OHIO 44136-9722
GT-2550

Questions and Answers:

White Outdoor GT-2150 Specifications

General IconGeneral
BrandWhite Outdoor
ModelGT-2150
CategoryLawn Mower
LanguageEnglish

Summary

Finding Your Model Number

Locate and Record Model Information

Instructions on finding and copying the tractor's model and serial number.

Calling Warranty Service

Contacting Customer Support

How to contact White Outdoor for warranty assistance and necessary information.

Important Safe Operation Practices

General Operation Safety

Key safety rules for operating the tractor safely.

Slope Operation Safety

Safe Practices for Slopes

Guidelines for safely operating the tractor on inclines.

Child Safety Precautions

Protecting Children Around Tractor

Rules to prevent injury to children around the tractor.

Service Safety Precautions

Maintenance Safety Guidelines

Safety measures to take when performing maintenance.

Operator Responsibility and Safety Labels

Understanding Safety Labels and Operator Roles

Visual safety guide and operator's role in safe use.

Slope Gauge Guide

Using the Slope Gauge for Safety

How to use the slope gauge to determine safe mowing areas.

Tractor Set-Up

Battery Cables, Fuel, and Oil Fill-Up

Connect battery cables, check oil, and fill fuel tank.

Attaching the Cutting Deck

Mounting the Cutting Deck

Detailed steps for mounting the cutting deck to the tractor.

Controls Overview

Key Tractor Controls

Overview of ignition, throttle, choke, PTO, and pedal controls.

Control Operations

Primary Controls (Drive, Brake, Lift, Parking)

How to operate drive, brake, lift, and parking controls.

Secondary Controls (Cruise, Seat)

How to use cruise control and adjust the seat.

Operation Procedures

Safety Interlocks and Engine Start

Explains safety interlocks and starting the engine.

Driving and Mowing Operations

Driving the Tractor and on Slopes

Instructions for driving forward, reverse, and safely on inclines.

Mowing Procedures and Tips

Guidance for effective and efficient lawn mowing.

Manual Movement and Headlights

Moving the Tractor Manually

How to engage the hydrostatic bypass rod to move the tractor.

Operating the Headlights

How to turn the tractor headlights on and off.

Adjustments

Brake and Steering Adjustments

How to adjust brakes and steering for optimal performance.

Deck Adjustments

Deck Leveling Procedures

Adjusting the cutting deck for front-to-rear pitch and side-to-side balance.

Maintenance Overview

Engine and Transmission Maintenance

Guidelines for engine oil changes and hydrostatic transmission care.

Component Maintenance

Engine Oil, Deck Belts, and Deck Removal

Steps for oil changes, belt replacement, and deck removal.

Belt and Fuse Maintenance

Transmission Belt, Fuse, and Tire Pressure

Procedures for belt change, fuse info, and tire pressure.

Blade Maintenance

Cutting Blades Maintenance

Instructions for removing, sharpening, and replacing cutting blades.

Lubrication Schedule

Lubrication Points

Lubrication schedule for pivot points, linkage, steering, wheels, and spindles.

Troubleshooting Engine Issues

Engine Not Starting or Smoking

Causes and solutions for engine starting and smoking problems.

Troubleshooting Performance Issues

Vibration and Cutting Performance

Solutions for excessive vibration and poor cutting results.

Manufacturer's Limited Warranty

Warranty Service and Exclusions

How to get service and what is not covered by the warranty.

Related product manuals