EasyManua.ls Logo

White Outdoor LT-17 686 User Manual

White Outdoor LT-17 686
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
LT-17
PRINTED IN U.S.A.
FORM NO. 770-10063A
(9/98)
Warning:
This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-
covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting
applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.
In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have
similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized
service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-9722.
WHITE OUTDOOR PRODUCTS COMPANY P.O. BOX 361131 CLEVELAND, OHIO 44136-9722
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
Model Number
686
LAWN TRACTOR
OPERATOR’S MANUAL
Question and Answer IconNeed help?

Do you have a question about the White Outdoor LT-17 686 and is the answer not in the manual?

White Outdoor LT-17 686 Specifications

General IconGeneral
BrandWhite Outdoor
ModelLT-17 686
CategoryLawn Mower
LanguageEnglish

Summary

Section 1: Finding Your Model Number

Section 2: Calling Warranty Service

Section 3: Important Safe Operation Practices

General Operation Safety

Guidelines for safe use, including operator responsibility and machine care.

Section 3: Slope Operation, Children, and Service

Slope Operation Safety

Precautions and rules for operating the tractor on slopes to prevent accidents.

Child Safety and Service Precautions

Safety measures concerning children and general service safety guidelines.

Section 4: Unpacking

Section 5: Assembly Instructions

Tools Required and Battery Information

Lists necessary tools and provides initial safety warnings for battery handling.

Section 5: Battery Handling and Steering Wheel Installation

Activating and Charging the Battery

Procedures for activating and charging Type "B" batteries.

Attaching the Steering Wheel

Step-by-step guide for mounting the steering wheel onto the tractor shaft.

Section 5: Seat and Chute Deflector Installation

Attaching the Seat

Instructions for properly mounting and securing the tractor seat.

Attaching the Chute Deflector

Steps for installing the discharge chute deflector onto the mower deck.

Section 5: Mulching Plug and Deck Leveling

Installing the Mulching Plug

Guide for attaching the optional mulching plug to the mower deck.

Leveling the Deck

Procedures for adjusting the deck height for an even cut.

Section 5: Battery Installation

Installing the Battery (Type "A")

Guide for installing the sealed, maintenance-free Type "A" battery.

Installing the Battery (Type "B")

Guide for installing the Type "B" battery, including acid filling and charging.

Section 6: Controls Overview

Ignition, Throttle, and Ammeter Controls

Explains the function of the ignition switch, throttle control, and ammeter.

Shift, Speed, Choke, Light, and Clutch Controls

Details on shift lever, speed control, choke, light switch, and clutch-brake pedal.

Section 6: Parking, Interlocks, and Cutting Controls

Parking Brake and Interlock Systems

Explanation of the parking brake, safety interlocks, and indicator lights.

Cutting Controls and Height Setting

Information on lift lever, deck height adjustment, and setting the cutting height.

Section 7: Operation Procedures

Gas and Oil Fill-Up

Guide for checking oil and filling the fuel tank before operation.

Starting, Stopping, and Operating the Tractor

Step-by-step instructions for starting, stopping, and driving the tractor.

Section 7: Cutting Blades and Adjustments

Operating Cutting Blades

Guidance on engaging, operating, and disengaging the mower's cutting blades.

Section 8: Adjustments

Procedures for seat, carburetor, deck leveling, and engagement adjustments.

Section 8: Wheel and Neutral Adjustments

Wheel Adjustment

Instructions for adjusting the front wheel toe-in for proper steering.

Neutral Adjustment

Procedure to ensure the transmission is correctly in neutral.

Section 8: Speed Control Adjustment

Speed Control Adjustment

Detailed steps to adjust the speed control linkage and lever for correct operation.

Section 9: Lubrication

Steering and Linkage Lubrication

Lubrication points for steering gears, shaft, and various linkages.

Wheel, Pivot, and Ball Joint Lubrication

Lubrication points for wheels, pivot points, and ball joints.

Brake Adjustment and Carburetor Notes

Brake adjustment procedure and notes on carburetor adjustments.

Section 10: Maintenance - Engine and Blades

Engine Maintenance and Oil Drain

Instructions for servicing the engine, air cleaner, spark plug, and draining oil.

Cutting Blade Maintenance

Detailed steps for blade removal, sharpening, reassembly, and torque specifications.

Section 10: Maintenance - Battery, Tires, Belts

Battery Care and Charging

Guidelines for battery maintenance, charging, and jump-starting procedures.

Tire Pressure and Belt Removal

Information on tire pressure and procedures for removing mower belts.

Section 10: Maintenance - Drive Belts

Deck Belt Replacement

Detailed steps for removing and replacing the mower deck belt.

Rear Drive Belt Replacement

Procedures for removing and replacing the tractor's rear drive belt.

Section 10: Maintenance - Front Drive Belt and Storage

Front Drive Belt Replacement

Instructions for removing and replacing the front drive belt.

Off-Season Storage Preparation

Guidelines for preparing and storing the tractor during extended periods of non-use.

Section 12: Optional Equipment

Section 13: Labels

Section 14: Troubleshooting Guide

Engine Starting Issues

Troubleshooting steps for when the engine will not crank or start.

Engine Performance Issues

Diagnosing and resolving issues like smoking, vibration, low power, or poor cut quality.

Manufacturer's Limited Warranty

Warranty Coverage and Obtaining Service

Explanation of warranty terms, limitations, and the process for service claims.

Related product manuals