EasyManua.ls Logo

White Outdoor Snow Boss 750T User Manual

White Outdoor Snow Boss 750T
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATOR’S MANUAL
SNOW
THROWER
MODEL
Snow Boss 750T
PRINTED IN U.S.A.
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
WHITE OUTDOOR PRODUCTS COMPANY P.O. BOX 361131 CLEVELAND, OHIO 44136-9722
Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-
covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting
applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.
In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have
similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized
service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-9722.
FORM NO.
770-10432.fm
(6/00)
ECO No. 01746

Questions and Answers:

White Outdoor Snow Boss 750T Specifications

General IconGeneral
BrandWhite Outdoor
ModelSnow Boss 750T
CategorySnow Blower
LanguageEnglish

Summary

Section 1: Important Safe Operation Practices

Section 2: Assembling Your Snow Thrower

Traction Control and Shift Lever Adjustment

Calibrating traction control and shift lever for smooth operation.

Section 3: Know Your Snow Thrower

Section 4: Operating Your Snow Thrower

To Start Engine

Step-by-step guide for starting the engine using recoil or electric start.

Electric Starter

Instructions for using the electric starter, including wiring and safety.

Recoil Starter

Detailed steps for starting the engine using the recoil starter.

To Stop Engine

Procedures for safely stopping the engine after use.

Section 5: Making Adjustment

Auger Control Adjustment

How to adjust the auger control cable for proper function.

Traction Control Adjustment

Steps for adjusting the traction control cable for correct operation.

Section 6: Maintaining Your Snow Thrower

Lubrication

Recommended lubrication points and intervals for the snow thrower.

Section 7: Servicing Your Snow Thrower

Engine

Procedures for servicing the snow thrower's engine.

Augers

Servicing the augers, including shear bolt replacement.

Belt Removal And Replacement

Instructions for removing and replacing auger and drive belts.

Off-season Storage

Preparing the snow thrower for long-term storage to prevent issues.

Section 8: Troubleshooting

Engine fails to start

Diagnosing and resolving issues when the engine does not start.

Engine runs erratic

Troubleshooting causes for inconsistent engine operation.

Unit fails to propel itself

Troubleshooting issues with the snow thrower's movement.

Unit fails to discharge snow

Resolving problems related to snow discharge.

Related product manuals