To Next PageTo Next Page
Need help?Do you have a question about the White Rodgers SST and is the answer not in the manual?
General| Brand | White Rodgers |
|---|---|
| Model | SST |
| Category | Air Cleaner |
| Language | English |
Warning about electrical shock risk during servicing.
Warnings about unqualified installation and hazardous environments.
Caution regarding sharp edges on unit components.
Explains how dirt particles are ionized and collected.
Information on optional charcoal filters and white dust phenomenon.
Details the cabinet, collecting cells, and pre-filters' functions.
Outlines the power pack's role in supplying high voltage.
Instructions on ensuring correct air flow direction through the unit.
Detailed measurements for SST1000, SST1400, SST1600, SST2000 models.
Mounting positions for lowboy and counterflow furnace types.
Mounting positions for highboy and horizontal furnace types.
Guidance on using duct offsets to accommodate installation.
Initial steps involving removal of old filters and cleaning the blower compartment.
Steps for attaching the cabinet to the furnace and connecting ductwork.
Guidance on using transition fittings and sealing duct joints.
Instructions for wiring the unit to the electrical input source.
Guidance on connecting wiring through furnace control terminals.
Steps for installing the power pack into the cabinet.
Steps for activating and deactivating the air cleaner using the switch.
Explains the meaning of the operating light status.
Step-by-step guide for washing the collecting cells and pre-filters.
Details airflow capacity and pressure drop for each model.
Lists cell weight, power consumption, and electrical output for models.
Specifies maximum ozone output and operating temperature range.
Checks for normal operation when the unit is on and blower is running.
Troubleshooting steps when the unit is on but the indicator light is off.
Troubleshooting steps when the blower is off but the indicator light is on.
Diagnosing and resolving issues causing excessive arcing during operation.
Emphasizes safety precautions and the need for qualified service personnel.
Details the specifications for the solid-state power supply unit.
Provides electrical output specifications for collecting cells based on cfm.
Steps for installing the retrofit kit, including pre-filters and collecting cells.
Instructions for wiring the ACR kit, referencing main wiring sections.
List of parts with their corresponding part numbers and descriptions for all models.
