Need help?Do you have a question about the White's Coinmaster 6000/Di Professional and is the answer not in the manual?
General| Technology | VLF |
|---|---|
| Frequency | 6.59 kHz |
| Weight | 3.5 lbs (1.6 kg) |
| Search Coil Type | Concentric |
| Discrimination | Yes |
| Sensitivity Adjustment | Yes |
| Ground Balance | Manual |
| Battery | 8 x AA |
| Intended Use | Relic Hunting |
| Search Coil Size | 8 inches |
| Search Modes | All Metal, Discrimination |
Guide to setting controls to preset for optimal performance.
Step-by-step guide to quickly tune the detector for use.
Details the functions of the power switch and hot rock settings.
Explains how to adjust the audio tone level for best results.
Brief overview of the tuner's purpose and operation.
Discusses silent operation and sensitivity trade-offs with the tuner.
Explains how the mode switch selects search conditions.
Details the GEB/NORM mode for all-metal detection and ground neutralization.
Explains GEB/MAX for deep targets and higher sensitivity.
Describes GEB/DISC for coinhunting in junk-rich areas.
How GEB/DISC rejects junk items and requires loop motion.
TR/DISC provides discrimination without full ground neutralization.
Describes the GEB process for ground balancing the detector.
Explains the Automatic GEB switch functions.
Tips for performing air and ground balance correctly.
Explains how GEB tracking self-adjusts the GEB setting.
Details the DISC control for target discrimination.
Explains how the DISC control works with GEB/DISC and TR/DISC modes.
Explains the sensitivity control's function.
Details how sensitivity affects audio tone and meter indications.
Explains the trigger switch's function in changing modes and meter readings.
Details VDI, Reference Scale, Depth Reading, and Battery Good indicators.
How the meter indicates target identity and reset function.
How to swing the loop for best coverage and depth.
Methods for accurately locating a detected target.
Step-by-step guide using de-tuning for pinpointing.
Using the meter's depth reading for pinpointing.
Explanation of overload protection in GEB/DISC mode.
Procedure for removing and inserting the battery pack.
Information on rechargeable battery charging and usage.
Steps for connecting and using the battery charger.
Safety warnings related to battery handling and charging.
How to clean the detector and protect from weather/salt water.
General advice to avoid damaging the detector.
Explains what is covered and for how long.
Lists items and conditions not covered by the warranty.
Identifies factory authorized service centers.
Steps for returning the unit for warranty service.
Rules and considerations before starting a search.
Proper techniques for digging and filling holes.
To Next Page