Need help?Do you have a question about the White's GOLDMASTER Series and is the answer not in the manual?
General| Audio Output | Speaker, Headphone Jack |
|---|---|
| Batteries | 8 AA |
| Discrimination | Yes |
| Display | LCD |
| Depth Indicator | Yes |
| Search Modes | All Metal, Discrimination |
| Ground Balance | Automatic and Manual |
| Target ID | Yes |
Diagram and explanation of the detector's control panel layout and display.
General introduction to the detector's control functions.
Adjusting signal strength for optimal detection in varying ground conditions.
Guidelines for setting sensitivity based on ground mineralization levels.
How to adjust audio volume and threshold for target detection.
Advantages and considerations for using external audio devices.
Adjusting the speed of the self-adjusting threshold recovery.
Fine-tuning V-SAT for stable threshold in changing ground conditions.
Understanding the target identification systems and numbers.
Selecting between Beep and Zip audio modes for target response.
How to use Iron Cancel to ignore unwanted iron targets.
Fine-tuning the Iron Cancel setting for specific conditions.
Overview of ground balancing features and options.
Explanation of the automatic XGB ground tracking system.
Locking the ground tracking for manual ground balance.
Performing a manual ground balance update.
Using Ground Scan to map mineral deposits.
General guidance for effective metal detecting searches.
Method for locating targets accurately using an 'X' pattern.
Alternative pinpointing mode without coil movement for target sizing.
Connecting and using headphones for better audio reception.
Adjusting audio volume for headphones for optimal listening.
Practical advice for using and tuning the detector in the field.
Information on backlight usage and battery consumption.
Techniques for handling challenging ground conditions.
Identifying and handling negative hot rocks that cause nulls or boings.
To Next Page
