White 140 - Bobbin Case Management; Removing the Bobbin Case; Inserting the Bobbin into Case

02/01/2008
Removing
the
bobbin
case
and
bobbin
1.
Raise
the
needle
to
its
highest
position.
Open
the
shuttle
cover.
Inserting
the
bobbin
2.
Open
the
latch
on
the
bobbin
case
and
pull
the
bobbin
case
out
of
the
machine.
cm
1.
Pull
out
abt.5cm
thread
from the
bobbin and
insert
the
bobbin into
the
bobbin
case
as
iflu
Thread tension spring
3.
Pull
the
thread
through
the
slot
and under
the
tension spring and
draw
out
about
10cm
thread
Hinged
latch
1’
/1’
3.
Release
the
lat-h
and
the
bobbin
wilt
fall
out.
2.
Guide
the
thread th
rough the
slot.
strated.