Need help?Do you have a question about the White 1634 and is the answer not in the manual?
General Specifications| number of threads | 4 or 3 |
|---|---|
| number of needles | 2 or 1 |
| sewing speed | Up to 1500 s.p.m |
Stitch Specifications| stitch width | 6 mm |
|---|---|
| stitch length | 1 — 5 mm |
| lift of presser foot | 4.5 mm |
Weight and Dimensions| dimensions | 285 mm (W) x 285 mm (D) x 291 mm (H) |
|---|---|
| weight | 7 kg |
| needle type | HA x 1 No. 11-14, 130/ 705H No. 75 - 90 |
Crucial safety guidelines to follow before and during operation.
Initial steps and checks before commencing sewing operations.
Guidance on setting the thread pole to the correct height and orientation.
Instructions on using cone holders for different thread spool types.
How to use spool caps with domestic thread spools.
Correct direction and method for turning the handwheel.
How to open and close the front cover of the machine.
Procedure for accessing and using the free arm feature.
Describes the convenience of the integrated handle for portability.
Table showing stitch length recommendations for various stitch types.
Explains how to achieve the correct cutting width for neat edges.
Instructions for increasing the cutting width.
Instructions for decreasing the cutting width.
Specifics on achieving a rolled edge finish.
Specifics on achieving a narrow edge finish.
Describes the mechanism of the two sets of feed teeth.
Step-by-step guide to adjusting the differential feed knob.
To Next Page
