Need help?Do you have a question about the White 1919 and is the answer not in the manual?
General| Brand | White |
|---|---|
| Model | 1919 |
| Category | Sewing Machine |
| Language | English |
Instructions to reduce the risk of electric shock from appliance usage.
Warnings for preventing burns, fire, electric shock, and injuries during operation.
Specific safety measures related to electrical appliance use and water hazards.
Keep fingers away from moving parts, use proper needle plate, avoid bent needles.
Switch off when adjusting, unplug for servicing, do not operate on soft surfaces.
Instructions on attaching and detaching the extension table for free-arm sewing.
How to open the lid of the accessory box.
How to switch on the machine and sewing light.
Instructions for attaching and removing snap-on presser feet.
Procedure for replacing screw-snap type presser feet.
Guidance on using straight, sharp needles and potential damage from defective ones.
Instructions for using the darning plate to control fabric feeding.
How to adjust presser foot pressure for different fabric types.
Basic practices for starting to sew, including needle testing and thread management.
Technique for sewing a square corner by lifting and turning the fabric.
How to test and adjust stitch performance by modifying thread tension.
Details on selecting different straight stitch lengths.
Information on selecting zigzag stitch types and widths.
Guidance on adjusting upper tension for optimal zigzag stitching.
How to measure and mark buttonhole size on material.
Procedure for attaching the buttonhole foot and positioning the fabric.
Steps for creating bar tacks at the start and end of buttonholes.
Instructions for sewing the left and right sides of the buttonhole.
How to adjust the buttonhole balance control for stitch density.
Method for creating corded buttonholes for stretch fabrics.
Using a ball-point needle for overcasting light weight fabrics.
Procedure for overcasting thick and elastic materials.
Technique for folding material and sewing blind hem stitches carefully.
Visual examples of correct and incorrect blind hem stitch results.
Information on fabrics suitable for shell stitching, like silk and organdy.
Instructions for patching worn parts of fabric.
Steps for mending a tear in fabric, including reinforcement.
Overview of special stitches for stretch and knit fabrics.
How to adjust the stretch stitch adjuster for balanced stitches.
Using straight stretch stitch for knitted and stretchy fabrics.
Application of rick-rack stretch stitch on stretch fabrics.
How to sew lapped seams on different fabric types.
Using overlocking stitches to sew and overcast seams simultaneously.
Steps for sewing buttons using zigzag stitches and darning plate.
How to use the special zipper foot for easy zipper insertion.
Instructions for creating roll hems on fabric edges.
How to use the quilting guide for consistent seam intervals.
Recommendations for needles and threads for good embroidery results.
Methods for tracing designs, satin stitch, and filling stitches.
Steps for cleaning the foot, needle plate, feed dog, and hook race.
Instructions on applying oil to specific parts of the sewing machine.
Causes and corrections for problems with breaking the lower thread.
Causes and corrections for skipping stitches.
Causes and corrections for irregular stitch formation.
Causes and corrections for problems with the material not feeding correctly.
Troubleshooting causes for material puckering and their solutions.
Causes and corrections for the needle breaking during operation.
To Next Page
