Need help?Do you have a question about the White 1620 and is the answer not in the manual?
General| Type | Mechanical |
|---|---|
| Stitch Width | 5 mm |
| Stitch Length | 4 mm |
| Buttonhole Styles | 1-Step |
| Free Arm | Yes |
Connect machine to power and adjust speed with controller.
Instructions for installing or removing the sewing lamp bulb.
Utilizing the free arm for sewing sleeves and tubular fabrics.
Steps for winding thread onto the bobbin, including stop motion knob.
Adjusting the upper thread guide for even bobbin winding.
Correctly placing the thread into the bobbin case.
Specific method for threading the machine with a twin needle.
Technique for pivoting fabric to alter sewing direction.
Dials for pattern selection, stitch length, and zigzag width.
Adjusts thread tension and enables reverse sewing.
Adjusting the upper thread tension via the dial.
Adjusting the bobbin thread tension via the screw.
Lowering the feed dogs for controlled fabric feeding.
Key tips for beginning sewing, including thread handling.
Essential notes on hand wheel operation and needle stopping.
Instructions for performing zigzag stitches and satin stitching.
Using this stitch on knitted or stretchy fabrics.
How to adjust needle position and stitch width for a correct blind stitch.
Using zig-zag stitch for joining fabric edges.
Performing embroidery using darning plate and lower feed dogs.
Using the seam guide for accurate seams.
Cleaning and oiling the shuttle race and hook.
Identifying and oiling key lubrication points on the machine.
Solutions for fabric feed problems.
Causes and corrections for breaking needles.
How to resolve upper and bobbin thread breakage.
Solutions for machine jamming and knocking noises.
How to fix puckering in stitches.
To Next Page
