White 1788 - Initial Setup Procedures; Connecting Power Supply

3EFORE
SEWING
Fit plug
into the machine.
2.
Plug the
machine to
the
power
supply.
3.
Sewing
speed can
be varied
by
the fool conirol.
Use
only
FDM
model
KD-1 902
foot
controller
with
sewing
machine.
REMOVE OFUNSTALL
BULB
1.
Open
face
cover
in
direction of
arrow.
2.
Remove bulb by
unscrew
ing it
counter-clockwise.
3.
Install
a new bulb
by
screwing
It
in
clockwise.
4. Use
a
screw type
bulb with
i2W/I 5W(Max).
IMPORTANT
When leaving
the sowing machine unattended,
the
plug
must be removed
from
the socket outlet.
When servicIng the sewing
machine,
or
when removing
covers or
changing lamps,
the machine
must
be
disconnected
from
the
supply
by
removing
the plug from the socket outlet.
Sewing lamp
—4—