White 1911 - REMOVING AND ATTACHING THE PRESSER FOOT

REMOVING
AND
ATtACHING
THE
PRESSER
FOOT
To
Remove:
1.
Turn
the
hand
wheel
towards
you
until
the
needle
is
at
the
highest
position.
Raise
the
presser
foot
by
lifting
the
presser
foot
lift.
2.
By
lifting
the
lever
on
the
back
of
the
foot
holder,
the
presser
foot
will
drop
off.
Note:
*
Do
not
force
the
presser
foot
to
remove
it.
To
Attach:
1.
Place
the
presser
foot
so
that
the
pin
on
the
foot
lies
just
under
the
groove
of
the
foot
holder.
Lower
the
foot
holder.
2.
When
the
presser
foot
lift
is
raised,
you’ll
find
the
presser
foot
is
locked
in
place.
—
13—