Need help?Do you have a question about the White 77 and is the answer not in the manual?
General| Brand | White |
|---|---|
| Model | 77 |
| Category | Sewing Machine |
| Language | English |
Explains lubrication, control, pulley adjustment, and electrical connections.
Provides detailed instructions for lubricating the sewing machine.
Instructions for cleaning the machine, especially if it gets dirty or sticky.
Steps for correctly inserting and positioning the sewing needle.
Advice on selecting and using the correct needles and thread.
Step-by-step guide for threading the upper thread through the machine.
Explains the function of the tension releaser operated by the presser bar lifter.
Instructions for threading the bobbin case with thread.
Steps for correctly inserting the bobbin case into the shuttle.
Instructions on how to safely remove the bobbin case from the shuttle.
Guide on holding thread and starting the first stitches.
Procedure for safely removing the sewn material from the machine.
Crucial safety advice against operating the machine without material.
Explains how correct tensions affect stitch appearance.
Detailed guide for adjusting the upper thread tension using the dial.
Instructions for adjusting the lower thread tension via the bobbin case screw.
How to reverse the feed and sew backward.
How to set stitch length for both forward and reverse sewing.
Steps for safely removing the shuttle from the machine.
Step-by-step guide on how to reinstall the shuttle assembly.
General advice on attaching and using machine attachments.
Instructions for attaching and using the narrow hemmer.
Using the narrow hemmer for finishing and trimming.
Method for applying lace using a French application technique.
How to create a felled seam using the hemmer as a guide.
Instructions for using various wide hemmers from a set.
Instructions for using the combination attachment for various decorative stitches.
How to use the attachment for wide tucks and trim stitching.
Using the attachment to join three edges simultaneously.
Applying braids like soutache for decorative designs.
Basic instructions for using the ruffler attachment to create ruffles.
Guide for creating pleats with a six-stitch spacing.
Instructions for pleating every twelfth stitch.
Method for creating groups of pleats with the ruffler.
Using the Shirring Plate for ruffles and continuous rows.
Steps for attaching and using the Shirring Plate.
Combining piping and edgestitching with the ruffler and shirring plate.
How to cut and prepare material for bias binding.
Using the cutting gauge for precise cutting of bands and bias.
Instructions for using the multiple slot binder for various binding widths.
Using multiple colored bindings for reversible finishes.
Guidance on binding curved edges using the binder.
Using the Quilter Guide for making parallel rows of stitching.
Instructions for performing machine darning to repair fabric.
Using the shirring foot for creating gathers and ruffles.
Instructions for using the foot for zippers and cording.
How to use the attachment for cording.
Instructions for attaching slide fasteners using the combination foot.
Troubleshooting common sewing machine issues.
Information on obtaining parts, supplies, and repair services.
An index of topics covered in the manual.
To Next Page
