Page/Song Control
Eye Mask
Play and Pause
Story Selection
TalkSync
TM
Technology
LCD Animated Eyes
Storytelling and Singing
Two Ways To Play!
Read along with Teddy Ruxpin
TM
when you
connect him to the free app!
Download from the App Store or Google Play.
Before You Start
• Remove the clear protective film coverings from both of
Teddy Ruxpin’s
TM
eyes.
• Locate the battery box in Teddy Ruxpin’s
TM
back by lifting
his vest and shirt. Using a Phillips head screwdriver,
unscrew the battery door and insert 4xAA (LR6) type 1.5V
batteries (not included). Lithium batteries are suggested for
longer playtime.
• Locate the switch on Teddy Ruxpin’s
TM
back and turn him on.
There are two settings: LOW volume and HIGH volume.
You can choose your preference.
Congratulations! Teddy Ruxpin
TM
is now your
storytelling friend. Read these instructions to
learn how to care for and play with him.
With the official return of Teddy Ruxpin
TM
,
exploring literacy and imagination has
never been more exciting! Advanced touch
sensors in his paws and chest, animatronic
mouth, and expressive eyes make Teddy
Ruxpin
TM
smarter and softer than ever before!
Contents
14” Teddy Ruxpin
TM
x 1
(Batteries Not Included)
Removable Eye Mask x 1
1
2
Storytelling and Singing
Teddy Ruxpin
TM
tells you stories and sings to you anytime,
anywhere. WiFi not required!
Interactive App Play
For advanced play, connect Teddy Ruxpin
TM
via Bluetooth to
the free app to read along and purchase hours of additional
storytelling fun.
Squeeze Teddy Ruxpin’s
TM
right paw to start the first
story. He comes with 3
pre-loaded stories:
1. All About Bears
2. The Airship
3. Captured By Mudblups
Squeeze his paw again to
move to the next story
from his internal library.
Realistic animatronic mouth
movements sync to stories.
Full color eye animations
react to Teddy Ruxpin’s
TM
stories and adventures!
Protect Teddy Ruxpin’s
TM
eyes when he’s not in use!
Squeeze Teddy Ruxpin’s
TM
left paw to pause and
resume the story.
Changing Batteries
Useful Electronics Information
Battery Box
Bluetooth LED
Reset
Power LED
OFF / LOW / HIGH
Bluetooth connectivity
Micro USB Port
NOT FOR CHARGING
*
Bluetooth Connectivity
Push this button when you want to
connect Teddy Ruxpin
TM
with your smart
device. See “Pairing and Launching
App” section.
Micro USB Port
THIS IS NOT A CHARGING PORT.
Teddy Ruxpin
TM
will only operate with
batteries. This is a data transfer port.
Reset
If Teddy Ruxpin
TM
is not functioning
properly, try pressing this button to help
him turn back on. This button will only
reset Teddy Ruxpin’s
TM
functions. No
stories will be deleted from his internal
storage library.
Sleep Mode
To save battery life, Teddy Ruxpin
TM
will go
into Sleep Mode after 5 minutes without
use. In Sleep Mode, his LCD eyes and
Bluetooth signal will turn off. Press any
button to wake him up again.
OFF/LOW/HIGH
To preserve battery life, always turn
Teddy Ruxpin
TM
off when not in use. For
playtime, Teddy Ruxpin
TM
operates at
LOW or HIGH volume.
Bluetooth LED
Bluetooth light will flash while your
smart device is pairing with Teddy
Ruxpin
TM
. Once pairing is successful,
the light will flash green.
Power LED
When battery is low, this light will
blink. When battery is very low, this
light will blink faster and Teddy
Ruxpin
TM
will go into Sleep Mode.
www.teddyruxpin.com
Push the badge on
Teddy Ruxpin’s
TM
chest to skip
to the next page or song.
26000-ISUS
To Next Page
Need help?
General