Customer helpline number: 01604 633607
Version 5 - 06/11
7
Step-by-Step Installation Instructions for
Pivot / Bi-fold Door & Side Panel Combination Pack
(216-992 / 216-993 / 216-995 / 216-997 / 216-999)
16. Making sure the room is well ventilated; finish off by applying silicone sealant as shown in
Fig.16.
NOTE: Sealant should not be applied to the inside of the enclosure when fitted over tiles (only
the outside) – this stops water from becoming trapped and turning stagnant. Allow 24 hours
(under normal conditions) for the silicone to cure before using the shower.
16
To Next Page
