Need help?Do you have a question about the Wickes Aquatronic 4 Ultra and is the answer not in the manual?
General| Brand | Wickes |
|---|---|
| Model | Aquatronic 4 Ultra |
| Category | Bathroom Fixtures |
| Language | English |
General installation and usage precautions for the shower unit.
Regulations and procedures for water connections, including pipe flushing and jointing.
Electrical installation standards, earthing, RCD requirements, and connection guidelines.
Details on power rating, MCB, voltage, and water inlet connections.
Materials used, dimensions, and adherence to safety standards.
Identification of internal parts of the shower unit with reference to Fig.1.
Identification of components located on the inside of the shower cover (Fig.2).
Miscellaneous items included with the shower, like screw kits and documentation.
Essential safety requirement for earthing and RCD/MCB protection.
Guidance on supply voltage, circuit separation, and consumer unit requirements.
Table A showing recommended circuit protection for different kW ratings.
Table B detailing current carrying capacity of PVC insulated cable based on installation method.
Instructions on where to position the shower unit, avoiding freezing and ensuring access.
Explanation of the PRD's function and precautions for its operation.
Steps for attaching the shower backplate to the wall, including drilling and fixing.
How to prepare openings in the trimplate or backplate for water and cable entry.
Procedure for connecting the water supply using compression fittings.
Importance of flushing pipework to remove debris before connecting the shower.
Schematic wiring diagram and guidance on cable entry points.
Instructions for connecting the supply cable to the terminal block.
Procedure to flush the unit and purge air before powering elements.
Steps for fitting the cover and connecting the ribbon cable.
Steps to ensure smooth water flow and remove air after initial connection.
How to connect the ribbon cable to the power PCB, noting orientation.
Important checks before refitting the cover, including connections and spindle alignment.
How to turn the shower on and off using the START/STOP button.
Explanation of HIGH/ECONOMY and COLD settings and their functions.
How to alter water temperature by adjusting flow rate via the temperature control.
Advice on testing temperature and safety notice for vulnerable users.
Description of POWER, LOW PRESSURE, and selector mode indicator lights.
How the shower manages shutdown and overheat protection.
Advice on cleaning methods and products to avoid damage and maintain warranty.
Procedure for periodic cleaning of the inlet filter to maintain performance.
Guide to identifying and resolving problems like no water flow or incorrect temperature.
Policy on availability and supply of spare parts after the guarantee period.
Details of the product guarantee, coverage, and what is not included.
To Next Page