Wico Command Control - WICO COMMAND CONTROL Numeric Keypad for Atari 5200; Numeric Keypad Connection for Atari 5200; Numeric Keypad Operation for Atari 5200

COMMAND CONTROL
Numeric Keypad for Atari® 5200™
CONTROLLER
RESET
CONNECTION: Your WICO COMMAND CONTROL Numeric Keypad is
designed for use ONLY with the WICO Analog Joystick for the Atari
5200, and connects easily to both the joystick and your Atari system.
Simply plug the joystick cord into the outlet on the keypad. Then plug
the keypad cord into the Atari 5200 control port, and you’re ready to
play. The joystick Y-cord included with the analog joystick is not needed
when using the keypad unit.
OPERATION: The keypad’s 12-key button cluster and 3 auxiliary momen
tary keys are functionally identical to the original Atari keypad, and
should be used in exactly the same manner. The 12-key button cluster
will accommodate all Atari 5200 game overlays.