Need help?Do you have a question about the Wieland wienetUMS 8-4POE-W and is the answer not in the manual?
General| Brand | Wieland |
|---|---|
| Model | wienetUMS 8-4POE-W |
| Category | Network Router |
| Language | English |
Manual is for qualified personnel, system integrators, and electricians for commissioning and operation.
The table of contents provides guidance on the manual's structure.
Explains safety notices (Danger, Warning, Attention, Note) and their severity levels.
Describes the switch's auto-sensing transmission speeds (10/100 Mbps) and auto-detected RJ-45 interface (MDI/MDI-X).
Explains PoE functionality, allowing power and data over a single Ethernet cable, reducing installation costs.
Features redundant power input design with P-Fail LED and relay output for notification of power failure.
The switch is compact and can be mounted on a DIN-rail or a panel for space-constrained environments.
Offers 3,000 V DC surge protection for power lines and 6,000 V ESD for Ethernet ports, plus current overload protection.
The switch operates in a wide temperature range from -40°C to 75°C, suitable for harsh industrial environments.
LED indicators on the front panel provide quick and easy troubleshooting for link status, speed, and power.
Lists key features like 8x 10/100Base-TX ports, 4 PoE injectors, surge/ESD protection, and flexible mounting.
Details the ordering code for the UMS 8-4POE-W, including its features and interfaces.
Provides recommendations for mounting on a work surface or DIN rail, including EMC rules and cable management.
Step-by-step instructions for mounting and removing the switch from a standard DIN mounting rail.
Instructions for wall-mounting the switch using the included mounting kit, with hole dimension details.
Explains the LEDs on the front panel indicating power and network status.
Details the pin assignment and description for the RJ-45 Ethernet ports, including data flow direction.
Describes how to connect the switch to other hubs or switches using RJ-45 ports and auto-crossover functionality.
Covers power supply requirements, grounding, and dual power input options for the switch.
Explains the importance of proper grounding for noise immunity and emissions performance.
Details the switch's power connection options, including single and dual DC supplies.
Step-by-step guide on how to wire the power outputs using the terminal block.
Lists detailed technical specifications for Ethernet, power supply, consumption, and general data.
Outlines the standards and regulations the switch complies with for telecom, emission, EMC, and safety.
Explains how panel indicators can help identify common problems and find solutions.
Provides answers to common troubleshooting questions regarding power indicators and data transmission.
To Next Page