Do you have a question about the Wigam EasyRec-1R and is the answer not in the manual?
Unit features an oil-less compressor: single piston for EASYREC 1R, double for EASYREC 2R.
The filter has two 1/4 SAE male connections and includes a hose for easier connection.
Equipped with two Ø60mm gauges on suction and discharge lines for pressure monitoring.
Connect unit with flexible hoses, ensure V4 valve is on 'Recovery', turn INPUT valve closed, OUTPUT open.
Ensure V4 valve is on 'Recovery/Recycling', turn INPUT valve closed, OUTPUT open.
Turn INPUT valve closed, OUTPUT open, press START, slowly turn INPUT to 'PURGE' until stop.
Connect unit, ensure V4 valve is on 'Recovery', operate system to pump liquid, then vapor.
Required materials include standard and high capacity drier filters and gaskets.
Replace gaskets when worn and filters regularly or when changing refrigerants.
| Brand | Wigam |
|---|---|
| Model | EasyRec-1R |
| Category | Test Equipment |
| Language | English |
Loading...