2.2 Personnel qualification
CAUTION!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and
damage to equipment!
■
The activities described in these operating
instructions may only be carried out by skilled
personnel who have the qualifications described
below.
■
Keep unqualified personnel away from hazardous
areas.
Skilled personnel
Skilled personnel are understood to be personnel who, based on their
technical training, knowledge of measurement and control technology
and on their experience and knowledge of country-specific
regulations, current standards and directives, are capable of carrying
out the work described and independently recognising potential
hazards.
2.3 Additional safety instructions for instruments per ATEX
CAUTION!
Non-observance of these instructions and their contents
may result in the loss of
explosion protection.
CAUTION!
It is imperative that the application conditions and
safety requirements of the EC-type examination
certificate are followed.
Temperature measuring instruments must be earthed via
the process connection!
EN
To Next Page
Loading...
