To Next PageTo Next Page
Need help?Do you have a question about the WIKA PU-448 and is the answer not in the manual?
General| Brand | WIKA |
|---|---|
| Model | PU-448 |
| Category | Motherboard |
| Language | English |
Describes the intended application of the PU-448 programming unit for specific WIKA transmitters.
Details the features and functionality of the PU-448 programming unit and its software.
Explains the information presented on the PU-448 product label and its symbols.
Details the USB interface and connector type for the PU-448.
Covers voltage supply, power supply, and connections for the PU-448.
Specifies the operating and storage temperature and humidity ranges for the PU-448.
Provides the physical dimensions of the PU-448 case and test clip cable.
Instructions for checking the programming unit for damage incurred during transport.
Guidance on when to remove the packaging before mounting.
Details permissible storage conditions and factors to avoid for the PU-448.
Information on installing WIKA configuration software and required administrator rights.
Describes connecting the PU-448 to T12/T24 transmitters using the magWIK connector.
Instructions for connecting the PU-448 to TR21/TR31/TR33/TR34 transmitters with M12 connectors.
Details connecting the PU-448 to TR30 transmitters using an angular DIN connector.
Steps to access the Control Panel for COM port configuration.
Navigating to System and Security within the Control Panel for device management.
Steps to open Device Manager to view and manage communication ports.
Adjusting advanced settings and changing the COM port number for the PU-448.
Selecting the correct COM port within the WIKA configuration software.
Explains the function of the two LEDs on the PU-448 for status indication.
Details the meaning of different LED colors and blinking patterns for status diagnostics.
