wiking Mini 2 User Manual (English)

Other manuals for wiking Mini 2

Installation And User Instructions24 pages

Questions and Answers:

K
Kimberly NewmanJul 27, 2025
Why is the glass pane on my Wiking Wood stove covered in soot?
- J
  Joseph MartinezJul 27, 2025
  Soot on the glass pane of your Wiking Wood stove can be due to several reasons: * The wood you're using might be too moist. Ensure you're only using firewood that has dried for at least 12 months under a covered shed, with a maximum water content of 18%. * A seal in the door might be loose. Check if the seals are soft and flexible; if not, replace them with new ones from your local dealer. * There might be an insufficient supply of secondary air to the pane-flushing system. Try moving the regulating handle further to the left. * The temperature inside the stove could be too low. Add more wood and move the regulating lever further to the left.
J
Joshua NicholsonAug 1, 2025
What to do if smoke enters the room when I open my Wiking Wood stove?
- W
  Whitney CareyAug 1, 2025
  If smoke enters the room when you open your Wiking Wood stove, it could be due to a few reasons: * The damper in the chimney might be closed. Make sure to open the damper before opening the door. * You might have poor chimney draft. Ensure that the smoke pipe or chimney is not blocked and that the chimney height is correct for your surroundings. * The firewood might be in flames. Never open the door if the firewood is actively burning with flames.
S
Samuel CooperAug 6, 2025
How to fix blackened fire-proof materials in my Wiking Wood stove combustion chamber?
- J
  Jeremy MoodyAug 6, 2025
  Blackened fire-proof materials in the combustion chamber of your Wiking Wood stove can occur if: * You haven't fired enough, meaning there's not enough air or firewood. Try moving the regulating handle further to the left and igniting a larger quantity of wood. * A seal in the door or ash drawer is loose. Ensure the seals are soft and flexible; replace them if needed with new ones from your local dealer. * There's excess chimney draft. Close the damper in the chimney a bit at a time until the issue resolves. Simultaneously, move the regulating lever further to the right.
A
alan87Aug 11, 2025
Why I cannot make a sufficient fire in my wiking Mini 2?
- B
  Barry OsbornAug 11, 2025
  If you're having trouble making a sufficient fire in your Wiking Wood stove, it could be due to incorrect lighting. Also, check for poor chimney draft. Ensure that the smoke pipe or chimney is not blocked and that the chimney height is correct in relation to its surroundings.
E
Erica Stevens DDSAug 16, 2025
Why are the fire-proof materials in the combustion chamber of my wiking Mini 2 Wood stove blackened after firing?
- O
  osaundersAug 16, 2025
  Blackened fire-proof materials in your Wiking Wood stove's combustion chamber could indicate that you haven't fired enough, meaning there's not enough air or firewood. Try moving the air control lever further to the left and igniting a larger quantity of wood. Another cause may be a loose seal in the door or ash drawer; ensure the seals are soft and flexible, and replace them if necessary. Excess chimney draft can also lead to this; close the damper in the chimney a bit at a time until the problem is solved, and simultaneously move the air control lever further to the right.

wiking Mini 2 Specifications

General

Brand	wiking
Model	Mini 2
Category	Wood stove
Language	English

wiking Mini 2 Installation And User Manual

Table of Contents

Other manuals for wiking Mini 2

Questions and Answers:

wiking Mini 2 Specifications