Need help?Do you have a question about the Wilbar Optimum Pool Round 95-0770 and is the answer not in the manual?
Key safety rules for pool use: no jumping/diving, supervision, chemical safety.
Instructions for installing warning labels for compliance and injury prevention.
Guidelines for selecting and preparing the pool installation site for safety and longevity.
Criteria for choosing a suitable pool location, avoiding hazards and ensuring proper setup.
Lists of parts for the Optimum Round Above/In-Ground pool assembly.
Table detailing components based on pool diameter and type.
List of tools required for pool assembly and installation.
Materials like patio blocks, concrete, and backfill for in-ground installations.
Preparing the ground, marking circumference, and leveling the site.
Procedure for placing and leveling patio blocks to support the pool structure.
Assembling pool wall panels using splines and ensuring proper alignment.
Securing wall panels to anchor plates and checking for pool roundness.
Building a sand cove and base inside the pool for liner protection.
Pouring a concrete collar around the perimeter for in-ground installations.
Lists of parts for fully in-ground and polymer step pool assemblies.
Component quantities based on pool size for fully in-ground polymer step pools.
Tools and additional items required for in-ground polymer step pool installation.
Preparing the site, marking circumference, and leveling for in-ground polymer step pools.
Placing and leveling patio blocks to support the in-ground pool structure.
Assembling pool wall panels and filler panels for in-ground polymer step pools.
Securing wall panels to anchor plates and ensuring roundness for in-ground pools.
Detailed steps for assembling and installing the polymer step into the pool wall.
Building the sand cove and base inside the pool for liner protection.
Pouring a concrete collar around the perimeter for in-ground pool stability.
Installing the skimmer assembly to the pool wall, including gaskets and plates.
Installing the return fitting assembly through the pool wall, securing with nuts and gaskets.
Attaching PVC and in-ground coping to the top of the pool panels for a finished edge.
Placing and securing the pool liner, removing wrinkles, and preparing for filling.
Inserting coping clips into panel joints to secure the top coping.
Filling the pool and installing skimmer/return faceplates after water reaches specific levels.
Adding backfill material around the pool, ensuring correct water level and compaction.
General| Brand | Wilbar |
|---|---|
| Model | Optimum Pool Round 95-0770 |
| Category | Swimming Pool |
| Language | English |
To Next Page
