Wilderness Systems PHASE 3 - User Manual

PHASE 3® AIRPRO SEAT BACK KIT
1. Seat Back (Qty. 1)
2. Seat Back Riser
(Qty. 1; includes parts for installation into boat)
3. Retainer Bungees with hooks (Qty. 2)
4. Riser Bungee (Qty. 1)
5. Double Buckle Strap (Qty. 1)
Wilderness Systems, 575 Mauldin Road, Suite 200, Greenville, SC 29607 Rev. 11/15#59504258
1
STEP 1: Insert one of the
Retainer Bungee with hooks
through top outer hole of the
riser so that once a knot is tied
it can be captured in the recess
of the front side of the riser.
STEP 2: Flip riser over. Tie a
single knot on the front side of
riser, leaving no more than ½” of
bungee behind the knot (knot
should fit inside the recess on
the front of the riser).
STEP 3: Repeat Step 1 & 2 for
the hole on the opposite side.
STEP 4: Finished riser with
bungee attached (orientation
showing the back of the Seat
Back Riser). The hooks will be
used during the installation of
the seat.
STEP 5: Locate the bungee
retention slot on the back,
lower portion of the Seat Back
(inside the recess and hidden
from direct view).
STEP 6: Loop the Riser Bungee
into the slot as shown, ensuring
that the bungee is retained in
the holes (view from top).
ASSEMBLY INSTRUCTIONS:

Summary

PHASE 3 AIRPRO SEAT BACK KIT COMPONENTS

Seat Back

Identifies the main seat back component included in the kit.

Seat Back Riser

Details the seat back riser, including parts for boat installation.

Retainer Bungees with Hooks

Specifies the quantity of retainer bungees with hooks included.

Riser Bungee

Lists the single riser bungee provided in the kit.

Double Buckle Strap

Notes the inclusion of one double buckle strap.

ASSEMBLY INSTRUCTIONS

Insert and Tie Retainer Bungee

Attaches retainer bungees to the riser via outer holes and ties a knot.

Locate and Loop Riser Bungee

Finds the bungee retention slot and loops the riser bungee into it.

Route and Secure Riser Bungee

Routes riser bungee ends, tightens them, and ties knots.

Attach and Test Double Buckle Strap

Aligns, secures the double buckle strap, and tests seat operation.

Wilderness Systems PHASE 3 Specifications

General

Brand	Wilderness Systems
Model	PHASE 3
Category	Boat
Language	English