To turn on and off the battery
1. If it is not already, fully insert the battery into the battery bottom base with the keys
removed while the key position shows Unlocked. At this time, the locking pin will be
retracted.
2. Key position shown: Unlocked
Insert the keys into the battery through the hole in the bottom of the frame. At this time,
the locking pin will be retracted.
3. Key position shown: Off
Twist the keys to the position shown Off, and the locking pin will move out to protrude
through the battery track. In this position, the battery will be locked to the frame but the
power will not be active.
5. Key position shown: On
Twist the keys to the position shown On, and the locking pin will move out to protrude
through the battery track. In this position the battery will be locked to the frame, the
power will be active, and the key will be locked into the battery so it cannot be
removed. The keys must be turned to the ON position for your bike to work.
To unlock the battery and remove it from the battery base, follow the steps listed above in
reverse order. Be sure to switch the keys to Unlocked and remove the keys from the battery
before removing the battery from the bike. If the keys are still at position Off or On, it will
prevent it from being removed from the battery case.
9
To Next Page
Loading...