Frame
1. To unfold the bike frame, grab the handlebar stem and rear end of the bike while
standing near where the battery is exposed. Lift the bike slightly off the ground and
swing the bike to its closed position.
2. Push down on the clasp firmly until it locks into position. You should have to use enough
force such that the clasp leaves an imprint in your palm. Pull on the clasp with your hand
to confirm that the clasp has locked and the frame cannot fold.
3. To unlock the bike frame and return it to the folded position, start by sliding the switch
to the right.
4. Pull the latch while still holding the switch to the position. You may now fold the bike.
Pedals
1. To fold the pedals push in slightly.
2. Continue pushing down while raising it into its folded position.
3. The pedal will click into place once in the folded position.
4. To unfold the pedals, push the pedals down until you hear an audible click as they
lock into the unfolded position.
5
To Next Page
Loading...