To Next PageTo Next Page
Need help?Do you have a question about the Wildfire RAVEL 400C and is the answer not in the manual?
Checklist for installers to ensure proper appliance commissioning.
Introduction to the user manual and appliance.
Important safety and operational warnings for the user.
Information regarding ventilation requirements for the appliance.
Explanation of the appliance's control lever and its functions.
Step-by-step instructions for lighting the gas fire.
Instructions for accessing and replacing the appliance's battery.
Procedures for removing and refitting the glass door panel.
Details on how to correctly re-install the glass door panel.
Instructions for setting up the ceramic fuel bed and identifying components.
Detailed instructions for placing volcanic rock, ember wire, and bark.
Specific placement instructions for ceramic logs C and E.
Specific placement instructions for ceramic logs A and B.
Specific placement instructions for ceramic logs F and G.
Guidance on initial use and potential smells or fumes.
Table for identifying and resolving common operational issues.
Details about the appliance's 5-year limited guarantee.
Instructions for safely unpacking the appliance and its components.
Essential safety and legal requirements for installation.
Appliance efficiency ratings and technical specifications.
General requirements prior to appliance installation.
Guidelines for appliance placement and proximity to combustibles.
Specifications for the non-combustible hearth.
Details on the required gas supply and connection.
Diagram and measurements of the appliance.
Regulations and minimum distances for flue terminal placement.
Guidance on positioning the appliance and cutting flue sections.
Recommended clearances around the appliance for safety.
Specific requirements for installing in timber-framed structures.
Instructions for cutting the brickwork for the flue pipe.
Steps for connecting the gas supply and performing soundness tests.
Steps for securing the appliance and connecting the flue.
Detailed diagrams and instructions for cutting flue sections.
Instructions for installing the flue terminal and guard.
Final steps for connecting the gas supply to the appliance.
Diagrams and instructions for assembling the flue terminal guard.
Technical specifications and data for the appliance.
Instructions for installing ceramic fuel bed components and identification.
Instructions for placing volcanic rock, ember wire, and bark.
Specific placement instructions for ceramic logs C and E.
Specific placement instructions for ceramic logs A and B.
Specific placement instructions for ceramic logs F and G.
Step-by-step instructions for lighting the gas fire.
Final steps and customer handover procedures for installation.
Important safety precautions when handling RCF fuel effect components.
General cleaning procedures for the appliance.
How to clean metal components of the appliance.
Detailed instructions for cleaning the ceramic fuel bed components.
Procedures for annual servicing by a Gas Safe registered installer.
Steps for removing the lower access door for servicing.
Instructions for removing and refitting the side glass panels.
Steps for removing and refitting the side ceramic plates.
Procedures for removing and refitting the rear glass panel.
Steps for removing and refitting the rear ceramic plate.
Detailed steps for removing the appliance's burner tray.
Instructions for removing the pilot assembly and related components.
Removing the thermocouple and microswitch related to the pilot.
Steps for removing the appliance's slide gas valve.
Instructions for removing the Tee Valve component.
Procedure for removing the spark generator.
Steps for removing the appliance's injectors.
Further steps for accessing and removing injectors.
Form for recording annual service history.
List of part numbers for user-replaceable components.
General| Brand | Wildfire |
|---|---|
| Model | RAVEL 400C |
| Category | Indoor Fireplace |
| Language | English |
