Wildfire WF250-CB User Manual

Owner’s Manual
WF250-CB
Call (866) 658-7300 for help, replacement parts or warranty information.
If you believe that your vehicle has a defect which could cause a crash or could cause injury or
death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in
addition to notifying (Jiangsu Kinroad Xintian Motorcycle Manufacture Co., LTD.).
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety
defect exists in a group of vehicles, it may order a recall and remedy campaign. However,
NHTSA cannot become involved in individual problems between you, your dealer, or (Jiangsu
Kinroad Xintian Motorcycle Manufacture Co., LTD.
To contact NHTSA, you may either call the Auto Safety Hotline toll-free at 1-800-424-9393 (or 366-
0123 in Washington, DC area) or write to: NHTSA, U.S. Department of Transportation, Washington,
DC 20590. You can also obtain other information about motor vehicle safety from the Hotline.
11

Wildfire WF250-CB Specifications

General

Compression Ratio	9.2:1
Fuel System	Carburetor
Ignition	CDI
Transmission	5-speed
Final Drive	Chain
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Drum
Engine Type	Single cylinder, 4-stroke
Cooling	Air-cooled
Starting System	Electric / Kick
Frame	Steel
Rear Suspension	Dual shock absorbers

Summary

Owner's Manual WF250-CB

NHTSA Safety & Reporting

Information on reporting vehicle defects to the NHTSA and contacting the Auto Safety Hotline.

General Safety Warnings

Vehicle Specifications

Lists the technical specifications of the Wildfire WF250-CB motorcycle, including engine, brakes, and tires.

Warranty Terms and Disclaimer

Outlines the warranty coverage, limitations, disclaimers, and the process for warranty validation.

Wildfire Limited Warranties

Owner's Warranty Obligations

Specifies owner's duties for maintaining warranty validity, including maintenance and proof of purchase.

General Safety Precautions

Crucial safety advice for operating the motorcycle, emphasizing rider responsibility and safe practices.

Introduction and Maintenance Schedule

Periodic Service/Lubrication Guide

A detailed chart outlining maintenance tasks and their recommended intervals for optimal performance.

Key Maintenance Procedures

Valve Clearance Adjustment

Step-by-step guide for checking and adjusting valve clearance to prevent engine damage.

Engine Break-In and Leak Checks

Instructions for initial engine break-in period and checking air supply lines for leaks.

Operation and Servicing

Pre-Ride Checks & Riding Steps

Guidance on pre-ride inspections, starting, riding, stopping, and parking procedures.

Common Service Tasks

Procedures for cleaning the air cleaner, adjusting the throttle, and replacing engine oil.