Feb 10, 2020 22:24
W02/04BRI - Quick Installation Guide - English
Connection to power supply (old generation models without PoE)
Connection to Ethernet
Connection to the line
Provisioning and configuration of the gateway
Reset of the gateway
Connection to power supply (old generation models without PoE)
Connect the gateway using the power supply and the cable provided with the gateway, as it is shown on the
picture:
Connection to Ethernet
The network port is situated on the rear panel of the gateway, marked as “ ”. It is used as a WAN port and Network
configured in the DHCP client mode.
Connect the cable as it is shown on the picture:
The steps below help you to connect and configure your BRI gateway. W02BRI and W04BRI are ISDN
VoIP media gateways that offer respectively 4 or 8 voice channels.
Updated: June 2015
Permalink: https://confluence.wildix.com/x/VQg8AQ
To Next Page
Need help?
General
