wildkin Vanity & Chair - User Manual

Thank you for purchasing a vanity set! To get started, please first be sure you have all the necessary components.
We suggest that you lay them all out on the carpet before assembling. If for any reason you think a component
may be missing, please contact our customer service team.
B2 Musical Box
(Right as you face the table)
*Please note: Your chair and
vanity might look slightly
different then the picture.
B1 Jewelry Box
(Left as you face the table)
Tools Needed for Assembly:
Standard Phillips Head Screwdriver. CAUTION: It is highly recommended that you not use power tools or electric
screwdrivers as screws should not be over-tightened.
General Safety Instructions:
Your vanity set is safety tested for 18-96 months. However, it is recommended that caution be used at all times.
Chairs are recommended for children up to 100 lbs.
Care Instructions:
Wipe clean with non-bleach cloth. If your item includes a cushion, please dry-clean cushion only.
Page 1 of 5
P: 866-727-0544 E: customercare@wildkin.com www.wildkin.com
Vanity & Chair Assembly Instructions
ADULT ASSEMBLY REQUIRED.
SMALL PARTS AND SHARP POINTS MAY BE PRESENT PRIOR TO ASSEMBLY.
KEEP OUT OF BABY’S REACH.
PLASTIC BAGS CAN BE DANGEROUS. TO AVOID DANGER OF SUFFOCATION, KEEP THIS
BAG AWAY FROM BABIES AND CHILDREN.
WARNING:

Summary

Vanity and Chair Assembly Guide

Product Introduction and Overview

Welcome message, note on potential appearance differences, and initial setup suggestion.

General Safety and Usage Guidelines

Safety testing age range, caution advice, and chair weight limit.

Assembly Tools and Care Instructions

Recommended tools, caution against power tools, and cleaning advice.

Critical Assembly Warnings

Emphasizes adult assembly, potential sharp points, and suffocation hazard from plastic bags.

Product Components

Identification of All Parts and Hardware

Lists and illustrates all components and hardware required for assembly.

Step-by-Step Assembly Instructions

Attaching Table Legs to Table Top

Instructions for securely attaching the table legs to the table top.

Mounting Jewelry Box and Musical Box

Guide for positioning and securing the jewelry box and musical box to the table top.

Securing the Mirror to the Table Top

Steps for attaching the mirror assembly, including washer usage and protective coating removal.

Assembling Chair Legs and Seat

Instructions for attaching the chair legs to the seat component.

Attaching the Chair Back

Guide for connecting the chair back to the assembled seat and legs using screws and washers.

Attaching Seat and Back Cushions

Instructions for tying the seat cushion and attaching the back cushion with velcro.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

This document provides assembly instructions and safety information for a Wildkin Vanity & Chair set.

Function Description:

The Wildkin Vanity & Chair set is designed as a children's furniture item, primarily for use by children aged 18-96 months. It consists of a vanity table with a mirror, a jewelry box, a musical box, and a matching chair. The vanity table serves as a surface for various activities, while the mirror allows for self-reflection and play. The jewelry box and musical box provide storage and entertainment features. The accompanying chair offers a comfortable seating option for the child using the vanity.

Important Technical Specifications:

• Age Range: 18-96 months (recommended).
• Chair Weight Limit: Up to 100 lbs.
• Assembly Tools: Standard Phillips Head Screwdriver (power tools or electric screwdrivers are not recommended to prevent over-tightening).
• Components:
  • Vanity Table:
    • (A) 1- Table Top
    • (B1) 1- Jewelry Box (left side when facing the table)
    • (B2) 1- Musical Box (right side when facing the table)
    • (E) 4- Table Legs
    • (F) 1- Mirror (shape may vary)
  • Chair:
    • (C) 1- Seat
    • (D) 1- Chair Back (shape may vary)
    • (G) 4- Chair Legs
    • (H) 1- Seat Cushion (note: some designs do not include a cushion)
    • (I) 1- Back Cushion
  • Hardware:
    • (s2) 2- Large Screws (1 ¼")
    • (s3) 3- Medium Screws (1")
    • (s4) 4- Small Screws (¾")
    • (w1) 2- Large Washers (1 ¼")
    • (w2) 2- Medium Washers (¾")
    • (w3) 3- Small Washers (⅝")
    • (w4) 5- Spring Washers (¾")

Usage Features:

• Adult Assembly Required: The product requires adult assembly due to small parts and sharp points that may be present prior to assembly.
• Safety Precautions:
  • Keep small parts and sharp points out of baby's reach.
  • Plastic bags can be dangerous; keep them away from babies and children to avoid the danger of suffocation.
  • Exercise caution at all times when the vanity set is in use.
• Assembly Process (Step-by-Step):
  1. Attach Table Legs to Table Top:
     • Set the Table Top (A) upside down on a soft floor surface to prevent scratching.
     • Insert each Table Leg (E) into one of the four holes on the bottom of the table and screw until secure.
     • Ensure legs are secure but not overtightened.
  2. Attach Jewelry Box & Musical Box to Table Top:
     • Position the pegs of the Jewelry Box (B1) and Musical Box (B2) onto the Table Top (A) as shown in the figure.
     • Insert Small Screws (s4) into the holes under the Table Top (A) and secure them with a Phillips Head screwdriver until tight.
  3. Attach Mirror to Table Top:
     • Position the Mirror (F) onto the Table Top (A).
     • Insert a Medium Screw (s3) through a Spring Washer (w4) and a Small Washer (w3) as shown in the figure.
     • Screw with a Phillips Head screwdriver until tight.
     • Unscrew plastic hooks on the back of the Mirror (F) to remove the protective coating. After the coating is removed, tighten the plastic hooks to secure the mirror in place.
  4. Attach Chair Legs to Seat:
     • Set the Seat (C) upside down on a soft surface to prevent scratching.
     • Thread each Chair Leg (G) directly into the hole on each corner of the Seat (C).
     • Tighten Chair Legs (G) securely.
  5. Attach Chair Back:
     • Turn the chair seat assembly over with the chair legs securely on the floor.
     • Insert the Chair Back (D) posts into the seat assembly through the pre-drilled holes.
     • Insert a Large Screw (s2) through a Spring Washer (w4), a Medium Washer (w2), and a Large Washer (w1) as shown in the figure.
     • Insert the screw into the hole on the bottom of the Chair Seat (C). Secure screws with a Phillips Head Screwdriver until tight.
  6. Attach Cushions:
     • Tie the Seat Cushion (H) to the poles on the bottom of the Chair Back (D) using tassels.
     • Attach the Back Cushion (I) using velcro on the Chair Back (D).

Maintenance Features:

• Cleaning: Wipe clean with a non-bleach cloth.
• Cushion Care: If the item includes a cushion, dry-clean the cushion only.
• Component Check: Before assembly, ensure all necessary components are present. If any component is missing, contact customer service.
• Assembly Surface: Lay out all components on a carpet before assembling to prevent damage.

wildkin Vanity & Chair Specifications