Wildview STC-TGL1 - Setup; Using the Camera After Setup

STC-TGL1
www.wildviewcam.com Toll Free 888-304-6125
10
Set up
•
Time out:
To set the amount of preset time in minutes the
camera will sleep between PIR triggering.
•
Resolution:
The resolution selection that you have selected.
o
High (VGA):
Select this option to capture a VGA image
quality.
o
Low (QVGA):
Select this option to capture a QVGA image
quality.
Using the camera
Select the time out and resolution setting before you turn on the
camera.
1. Select the time out interval by sliding the time out toggle switch to
the desire preset time interval in minutes.
1 / 5 / 10 / 20 minutes
.
2. Select the resolution setting by sliding the resolution toggle switch
to the desire resolution setting.
Hi / Lo resolution
.
Once the program setting has been completed your Wildview scouting
camera is ready for field use.