Wildview Series
www.wildviewcam.com Toll Free 888-304-6125
9
of images on the built in memory unless the expansion
card is inserted at which point the front counter will only
display the number of images stored in the expansion
card.
Inserting SD card
Make sure camera is in the OFF position whenever
adding or removing memory.
• Insert SD memory card in to the SD card slot
completely and in the correct direction as shown on
the inside of the housing.
• To remove the SD memory card, depress the SD
card and pull out the card gently.
SD cards must be clean (no images from other
sources.)
To Next Page
Loading...
